Adding a Carrier

Top Previous Next

The process for adding a carrier is fairly simple, though some of the options you have when adding a carrier can be quite complex. To bring up the menu to add a carrier, simply Right Click on the word Carriers in the PageGate Admin, then left click add or hit Ctrl+N on your keyboard and select the New Carrier option.

Once a carrier has been added to the PageGate Admin, you will see it appear beneath the Carriers section of the Admin.

Each carrier has three sub-sections: Settings, Template, and Advanced.

If you need to set up a carrier that requires a password, you must first create a carrier. After the carrier has been added, Edit the Advanced Settings of the Carrier.

Due to the fact that each protocol has a different group of required settings, please see the following sections:

•	Creating a FAX Carrier

•	Creating a File Carrier

•	Creating an HTTP GET Carrier

•	Creating an HTTP POST Carrier

•	Creating a GSM-AT Carrier

•	Creating a RawSerial Carrier

•	Creating a RawTCP Carrier

•	Creating an SMTP Carrier

•	Creating an SNPP Carrier

•	Creating a TAP Carrier

•	Creating a TONE Carrier

•	Creating a UCP Carrier

•	Creating a WCTP Carrier