| 1) | Open the PageGate Admin. |
| 2) | Right click on Carriers |
| 4) | Name the Carrier what it needs to be (T-Mobile, Cingular, Verizon, etc). |
| 5) | Set the Protocol to UCP. |
| 6) | In the phone number field, you'll need to enter the phone number for your carrier's UCP Host. |
| 7) | Set the baud rate, parity, data bits, and stop bits to the carrier's specifications. |
NOTE: If the carrier doesn't specify these settings, the industry standard for UCP is as follows:
Baud Rate: 1200
Parity: None
Data Bits: 8
Stop Bits: 1
| 8) | Click on the drowndown arrow next to Init String and set it to: (auto) |
| 9) | Set the Max Chars to the maximum number of characters that this carrier's devices can receive. |
| 10) | Click on Apply to add the carrier to your Carriers list. |
|
|
