Creating a RawTCP Carrier

<< Click to Display Table of Contents >>

Navigation:  PageGate Admin > Using the PageGate Admin > Carriers > Adding a Carrier >

Creating a RawTCP Carrier

Previous pageReturn to chapter overviewNext page

Creating a RawTCP Carrier

Top Previous Next


1)Open the PageGate Admin.


2)Right click on Carriers


3)Left click Add.


4)Name the Carrier what it needs to be (Site1, Site2, etc).


5)Set the Protocol to RawTCP.


6)In the Host field, type the host to which the data will be transmitted.


7)Type in the port over which data is to be sent or leave the port at 23.


8)Set the Max Chars to the maximum number of characters the TCP host can receive.


9)Click on Apply to add the carrier to your Carriers list.