Creating a new Carrier

To create a new carrier, you'll need some basic information about the types of messages you want to deliver and we would strongly recommend having a look at the How PageGate Sends Messages section of the documentation for more information on that. However, once you know which protocol(s) you want to implement for message delivery, you'll need to create a new carrier or series of carriers.

•How to create an XMPP Carrier (Extensible Messaging and Presence Protocol)

A method used to communicate with a variety of notification and chat programs, such as Jabber.

•How to create a TAP Carrier (Telocator Alphanumeric Protocol)

This protocol is used to send messages to a receiving TAP system, normally paging transmitters, by dial-up modem or serial connection.

•How to create a TAP-IP Carrier (Telocator Alphanumeric Protocol delivered by TCP/IP)

This protocol is used to send messages to a receiving TAP system, normally paging transmitters, by TCP/IP.

•How to create an SMTP Carrier (Simple Mail Transfer Protocol)

The protocol used to deliver email and email to SMS messages.

•How to create an SNPP Carrier (Simple Network Paging Protocol)

A standard message delivery protocol for internet communication to a wireless provider.

•How to create a WCTP Carrier (Wireless Communications Transfer Protocol)

A standard message delivery for Internet communications to a wireless provider (both HTTP and HTTPS are supported).

•How to create a GSM-AT Carrier (Global System for Mobile communication AT Command Set)

A method used to communicate cellular modem or other connected wireless device that provides a COM port in Windows and supports the AT command set for SMS delivery.

•How to create a GSM-AT-IP Carrier (Global System for Mobile communication AT Command Set over IP)

A method used to communicate with a with a NotePage SMS Gateway App enabled Android phone, cellular modem, router, gateway or other connected wireless device that accepts AT commands by TCP for SMS delivery.

•How to create an HTTPGET Carrier

The GET method of passing CGI parameters to a web API.

•How to create an HTTPPOST Carrier

The POST method of passing CGI parameters to a web API.

•How to create a Touch-Tone/DTMF Carrier (Dual Tone Multi-Frequency)

A way to deliver touch tone messages to older numeric-only pagers and similar equipment.

•How to create a FAX carrier (Facsimile Machines)

Message delivery to destination Fax machines via faxmodem.

•How to create a FAXSrv Carrier

This protocol allows PageGate to integrate with a Microsoft fax server for facsimile messages.

•How to create a RawSerial Carrier

Transmission of message text over a standard serial/RS232 port (direct connect or via modem).

•How to create a RawTCP Carrier

Transmission of message text to a host via a TCP/IP connection

•How to create a File Carrier

Output a message as an ascii formatted file to a specified directory.

•How to create a UCP Carrier (Universal Computer Protocol)

A delivery protocol for analog modem, or direct serial communications to a wireless provider.