Integrating Zetron with PageGate
Follow these steps to use Zetron Terminals with
PageGate
1) To use PageGate with a
serial TAP terminal, you'll need to connect the
computer running PageGate to the Zetron terminal
with a serial cable.
2) Then you'll need to do
this inside PageGate: 1) Open the PG Admin.
3) Right click on Carriers,
left click on Add.
4) Specify the following:
Name: Zetron Protocol:
TAP Baud Rate: 1200
Parity: even
Data Bits: 7
Stop Bits: 1
Init String: direct (manually type this in
the field) |
5) Click on Apply.
6) Go to Connectors - Connector
1 - Settings.
7) Set the "Serial Port"
field to match the serial port the cable is plugged
in to.
8) Put a check in 'Direct
Connect'
9) Click on Apply.
|