Creating a RawSerial Carrier

Top  Previous  Next

Creating a RawSerial Carrier

Top Previous Next


Open the PageGate Admin.



Right click on Carriers



Left click Add.




4. Name the Carrier what it needs to be (Site1, Site2, etc).


5. Set the Protocol to RawSerial.


6. Set the baud rate, parity, data bits, and stop bits to match the host's settings.


7. Click on the drowndown arrow next to Init String and set it to: (auto)


8. Set the Max Chars to the maximum number of characters you wish to be sent in a transmission.


9. Click on Apply to add the carrier to your Carriers list.