Creating a RawTCP Carrier

Top  Previous  Next

Creating a RawTCP Carrier

Top Previous Next


Open the PageGate Admin.



Right click on Carriers



Left click Add.




4. Name the Carrier what it needs to be (Site1, Site2, etc).


5. Set the Protocol to RawTCP.


6. In the Host field, type in the host that data will be transmitted to.


7. Type in the port over which data is to be sent or leave the port at 23.


8. Set the Max Chars to the maximum number of characters the TCP host can receive.


9. Click on Apply to add the carrier to your Carriers list.