The FAXSRV protocol configures this carrier to pass fax transmissions to a local Microsoft Fax Server.
Note: The fax number to dial/send to is configured in the Recipients section.
| 1) | Select the FAXSRV protocol. |
| 2) | Give the Carrier a name. |
| 3) | Click on the Advanced button. |
| 4) | The Max Chars value determines the maximum number of characters that can be transmitted in a single fax. |
| 5) | Set the Priority of the carrier. This can be set to a value from 1 to 100, with 1 representing the highest priority. The default value all carriers and recipients is 100, however, numbers larger than 100 can be used. |
| 6) | Click on Back. |
| 7) | Click on Apply. |
| 8) | Click on OK. |