PageGate can easily be configured to send messages through the Bryx911 platform and since they support multiple protocols, you can even configure failover methods of delivery.
Here's what you'll want to do:
1) Open PG Admin.
2) Right click 'Carriers', select 'Add'.
3) Name the carrier: BryxSNPP
4) Specify the following:
Protocol: SNPP
Host: snpp.bryx911.com
Port: 444
Max Chars: 600
5) Click Apply.
6) Name the carrier: BryxSMTP
7) Specify the following:
Carrier Domain: alert.bryx911.com
Port: The port required by your SMTP server.
Max Chars: 600
8) Click Apply.
9) Go to Carriers - BryxSMTP - Advanced.
10) Select 'Deliver through outgoing mail server' and enter your SMTP server address in the 'Relay Server' field.
10a) Enter the required values in the Username and Password fields.
11) Click Apply.
12) Go to Carriers - BryxSNPP - Advanced.
13) In the Failover field, select 'BryxSMTP'
14) Click Apply.
At this point, all you'll need to do is create recipients that are tied to the BryxSNPP carrier. The value in the ID/PIN field will be the ID assigned by Bryx911. You will not need to include @alert.bryx911.com in the ID field, the program will automatically supply that value; you just need the part before the @ in the ID/PIN field.
