Steps to Use Zenoss Network Monitor with PageGate
First, we'll need to configure the GetMail interface to accept messages.
1) Right click on the PG Admin shortcut and select 'Run as Administrator'
1a) If prompted by the UAC, allow the process to continue.
2) Go to Interfaces - GetMail - Settings.
3) Check Enabled.
4) PageGate will accept message addressed to the domain referenced in the 'Local Domain' field. For example, if PageGate is installed on a system whose internal IP is accessible from the Zenoss system, you could use the internal IP address of the PageGate server in the 'Local Domain' field. If you do so, you would address email to PageGate as
You can also create an email sub-domain or domain and redirect its A and MX records to the PageGate server. For example, let's say we have the domain 'something.com'. We could create 'alert.something.com' or 'sms.something.com' and redirect it to the PageGate server. When you do, use the domain or sub-domain value in the 'Local Domain' field.
The rest of the settings aren't related to bringing traffic in to the program, so we won't need to configure anything else.
5) Click Apply.
5a) If prompted, you do want this enabled for all of the recipients and groups.
6) Go to Program - Settings.
7) Check 'GetMail' in the 'Run on this Server' section.
8) Click Apply.
9) If prompted for credentials, leave them blank and click Apply again.
Once you have PageGate ready to receive the email from Zenoss, you can configure Zenoss to email your PageGate contact to send an SMS.
NotePage, Inc.
PO Box 296
Hanover, MA 02339