Voalte supports receiving messages by WCTP, an HTTPS method of delivery..
Step 1: Configure Voalte as a delivery method
1)Run PG Admin.
2)Right click Carriers, select Add
3)Specify the following and click Apply:
Carrier: Voalte Protocol: WCTP Host: cws01.voalte.net/wctp Port: 50100 Max Chars: 6000 |
|
4)Go to Carriers - Voalte - Advanced
5)Specify the following:
Priority: 1
6)Click Apply
7)Go to Carriers - Voalte - Template
8)Specify the following in the 'Settings' section:
StripNonPrintable = True From = Your whitelisted Voalte Sender ID |
|
9)Click Apply.
Step 2: Create Recipients tied to the Voalte method of delivery
1) Right click Recipients, select Add.
2)Specify the following:
Full Name: The name of the recipient Recipient: This field will automatically populate but can be edited and may ONLY contain alphanumeric characters, underscores and dashes.
Type: Normal Carrier: Voalte Failover: See Failover Scenarios ID/PIN: Voalte Conact ID Max Chars: Specify the number of characters you want the ability to send to this recipient. If this value is higher than the carrier's "Max Chars" value, PageGate will break up long messages in to multiple blocks. |
|
3)Click Apply.