The Fire Horn provides a CGI URL for clients to submit messages to and they can use PageGate's HTTPGET protocol to do so.
Step 1: Configure FireHorn as a delivery method
1)Run PG Admin.
2)Right click Carriers, select Add
3)Specify the following and click Apply:
Carrier: Rover Protocol: HTTPGET Host: thfirehorn.com/api/software_relay/text_message/YourSiteKeyHere/ NOTE: You will need your Fire Horn site key as part of the host address. Port: 443 Max Chars: 6000 |
|
4)Go to Carriers - FireHorn - Template
5)Specify the following in the 'Text' section: |message|%Message%|
6)Click Apply
Step 2: Create Recipients tied to the FireHorn method of delivery
1) Right click Recipients, select Add.
2)Specify the following:
Full Name: Describe the agency being messaged Recipient: This field is auto-populated and may need to be edited. When integrating with a CAD system, this field will need to reflect CAD's name.
For example, if CAD is going to dispatch 'Palentine Fire District 2' by calling on the name pfd2, that is the value you would use in this field.
Type: Normal Carrier: FireHorn Failover: See Failover Scenarios ID/PIN: Enter the FireHorn ID Max Chars: 6000 |
|
3)Click Apply.