Setting |
Function |
Failover is the ability of PageGate to send an undeliverable message to an alternate host. For example, you could configure a Fax carrier and an SMTP/Email carrier. Then you could specify the SMTP/Email carrier as the failover for the Fax carrier and if a Fax can't be delivered, it will instead be delivered as an email. The failover settings at the carrier level is used to redirect all the pending messages to another carrier when the original carrier can't be contacted. |
|
Priority |
This field determines this carrier's place within the priority system.
By default, all carriers have their priority value set to 100 which puts them all on equal footing. If you leave 100 as your baseline, giving a carrier a priority value lower than 100 will be considered more important with a value of 1 being the most important and a value higher than 100 will be considered less important up to the maximum value of 32000 being the least important. |
Max PIN Length |
This field is used to limit the number of digits accepted from a recipient's ID/PIN field for this carrier (extra digits are stripped of the beginning). |
Apply |
This button saves any changes made to a carrier's Advanced Settings. |