4. Enter the name of the recipient's wireless Carrier (AT&T, Arch Wireless, Host1, etc.)
5. Set the Protocol to WCTP.
6. Type in the WCTP host you need to contact. You can find a list of WCTP Hosts in the Support section of our website: http://www.notepage.net/wctp.htm
7. The Port field should always be set to 80 for WCTP carriers. Do not change this field.
8. Set the Max Chars to the maximum number of characters the WCTP host can receive.
9. Click on Apply to add the carrier to your Carriers list.
|
