4. Name the Carrier what it needs to be (T-Mobile, Cingular, Verizon, etc).
5. Set the Protocol to UCP.
6. In the phone number field, you'll need to enter the phone number for your carrier's UCP Host.
7. Set the baud rate, parity, data bits, and stop bits to the carrier's specifications.
NOTE: If the carrier doesn't specify these settings, the industry standard for UCP is as follows: Baud Rate: 1200 Parity: None Data Bits: 8 Stop Bits: 1
8. Click on the drowndown arrow next to Init String and set it to: (auto)
9. Set the Max Chars to the maximum number of characters that this carrier's devices can receive.
10. Click on Apply to add the carrier to your Carriers list.
|
