NotePage, Inc. Forum Index

CMS ERROR 330

 
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> PageGate Support
View previous topic :: View next topic  
Author Message
pavelurban



Joined: 12 Jun 2014
Posts: 1
Location: Prague

PostPosted: Thu Jun 12, 2014 8:22 am    Post subject: CMS ERROR 330 Reply with quote

Hi,

I configure Pagegate with a modem Anydata ADU-770WH and when I try to send a test message, I can see:

6/12/2014 3:11:56 PM ========================================

6/12/2014 3:11:56 PM Start connection to carrier: anydata

6/12/2014 3:11:56 PM Connect using GSM protocol

6/12/2014 3:11:56 PM Setting communication parameters (115200,n,8,1)

6/12/2014 3:11:56 PM Attempting to reset modem

6/12/2014 3:11:56 PM Sent:AT<CR>

6/12/2014 3:11:57 PM Received:<CR><LF>OK<CR><LF>

6/12/2014 3:11:57 PM Modem reset

6/12/2014 3:11:57 PM Attempting to send connector init string

6/12/2014 3:11:57 PM Sent:AT+CSQ<CR>

6/12/2014 3:11:58 PM Received:<CR><LF>+CSQ: 19,99<CR><LF><CR><LF>OK<CR><LF>

6/12/2014 3:11:58 PM connector init string sent

6/12/2014 3:11:58 PM Sent:AT+CMGF=1<CR>

6/12/2014 3:11:59 PM Received:<CR><LF>OK<CR><LF>

6/12/2014 3:11:59 PM Text delivery mode entered

6/12/2014 3:11:59 PM ----------------------------------------

6/12/2014 3:11:59 PM Working on message to: urban from: SAM

6/12/2014 3:11:59 PM Formatting message

6/12/2014 3:11:59 PM Message contained in a single packet

6/12/2014 3:11:59 PM Sending packet

6/12/2014 3:11:59 PM Sent:AT+CMGS="deleted_number"<CR>

6/12/2014 3:12:00 PM Received:<CR><LF>+CMS ERROR: 330<CR><LF>

6/12/2014 3:12:00 PM Sent:SAM:rewq<SUB>

6/12/2014 3:12:31 PM Error sending packet

6/12/2014 3:12:31 PM Attempting to hang up modem

6/12/2014 3:12:31 PM Sent:AT<CR>

6/12/2014 3:12:32 PM Received:<CR><LF>OK<CR><LF>

6/12/2014 3:12:32 PM Modem hung up

I have found, that CMS ERROR 330 means that the address of the operator SMSC is not defined. It seems to be a bug in commonly used modem chipsets, where they do not read this address automatically from the SIM.

Is any way to manually add the number to Pagegate configuration?

thank you for help

Pavel Urban


Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4041

PostPosted: Thu Jun 12, 2014 10:25 am    Post subject: Reply with quote

Pavel,

To have PageGate pass the SMSC value, this is what you'll want to do:

1) Open the PG Admin.

2) Go to Carriers - anydata - Settings.

3) In the init string field, take out what's in there now and type in:
AT+CSCA=<SMSCnumber>

4) Click on Apply.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
Display posts from previous:   
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> PageGate Support All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group
Theme created by Vjacheslav Trushkin