| View previous topic :: View next topic |
| Author |
Message |
pwright
Joined: 04 Sep 2005
Posts: 28
|
 Posted: Sun Jul 04, 2010 9:33 am Post subject: Modem init string problem |
 |
|
I have an old modem I want to use as a backup (which I used for Notepager Pro before).
Can't find an init string that will make it work with PageGate 5.0 on my existing page server. I tried all the stock inits & "auto", none seem to do the trick.
It's a US Robotics, Sportster 33.6 Fax modem, w/ DB9 cable to comm port.
PageGate will detect on modem scan & it will dial up.
I have the log file from attempts also.
Phil
|
|
| Back to top |
|
Tech Support
Joined: 25 Aug 2003
Posts: 4382
|
| Posted: Tue Jul 06, 2010 8:35 am Post subject: |
|
|
Phil,
If you would, let me know what baud rate, data bits, parity and stop bits you're using and what you're connecting to (TAP Terminal, Zetron unit, etc).
then, if you would, reset the init string to (auto) and try to send out a message. Then send me the connector log to support at notepage dot com. |
|
| Back to top |
|
pwright
Joined: 04 Sep 2005
Posts: 28
|
| Posted: Sat Jul 10, 2010 10:42 am Post subject: |
|
|
Log file is on its way. "Conn log 07102010"
Thks, Psw
|
|
| Back to top |
|
Tech Support
Joined: 25 Aug 2003
Posts: 4382
|
| Posted: Mon Jul 12, 2010 9:44 am Post subject: |
|
|
According to the log file you sent, the modem is working properly?
I can see where it picked up the line, dialed the terminal, connected, negotiated the connection, initiated the protocol, delivered the message, then hung up. |
|
| Back to top |
|
|
