Tech Support
Joined: 25 Aug 2003 Posts: 4387
|
Posted: Tue May 08, 2007 8:01 am Post subject: |
|
|
SMTP is the most widely supported of the three, so here's how to configure an SMTP Carrier in NotePager Pro:
1) Left click on the Carriers menu.
2) Left click on Add.
3) Name the carrier: SMTP
4) Change the Protocol to: SMTP
5) Your Local Domain needs to be set to the latter half of your email address. This is how NotePager Pro identifies itself when the receiving domain asks where the message is from.
6) Enter in your Primary DNS into DNS Server 1 and your Secondary DNS into DNS Server 2. If you're not sure what either of these are, please contact your internet service provider or network admin and ask them.
---------------------------------------------------------------------
1) Now that the Carrier has been added, left click on Recipients.
2) Left click on Add.
3) You can name the recipient whatever you like.
4) The Type should be normal and change the Carrier to SMTP.
5) In the "Email To" field, enter the email address for a phone, pager, or just a regular email address. If you're not sure what your device's email address is, we do keep a current list of email suffixes for the various carriers here: http://www.notepage.net/smtp.htm
6) Make sure that Alpha and Drop non-printable characters are cheked.
7) Click on Apply. |
|