| View previous topic :: View next topic |
| Author |
Message |
CSI
Joined: 19 Jul 2005
Posts: 4
|
 Posted: Tue Jul 19, 2005 10:51 am Post subject: sending error |
 |
|
Hello,
i configured the PageGate v4 as it should work, but i got this error from the logs when i try to send an SMS via UCP :
"No response from terminal"
Where can it come from ?
I am sure i'll need to provide you more infos .. :)
Thanks in advance.
_________________
--
CSi
|
|
| Back to top |
|
Tech Support
Joined: 25 Aug 2003
Posts: 4407
|
| Posted: Thu Jul 21, 2005 7:57 am Post subject: |
|
|
| Generally, when you get that error, the UCP Terminal that you're dialing into isn't responding. This means that PageGate is picking up the modem and dialing but it's not receiving any sort of a response from the phone number that it has dialed. That problem could be caused by one of a few different things, so the best place to start is to find out which carrier are you trying to use?
|
|
| Back to top |
|
CSI
Joined: 19 Jul 2005
Posts: 4
|
| Posted: Thu Jul 21, 2005 8:51 am Post subject: |
|
|
I try to contact a swisscom gateway.
I ll check with them about that number .. thx !
_________________
--
CSi
|
|
| Back to top |
|
CSI
Joined: 19 Jul 2005
Posts: 4
|
| Posted: Fri Jul 22, 2005 7:15 am Post subject: |
|
|
The line seems ok. i can call that number from a hyperterminal on the box where is installed pagegate ..
any idea ?
_________________
--
CSi
|
|
| Back to top |
|
CSI
Joined: 19 Jul 2005
Posts: 4
|
| Posted: Fri Jul 29, 2005 3:21 am Post subject: |
|
|
i had a contact with swisscom, they dont have logs for that gateway.
they ask me if i can send the the UCP string the modem tries to send.
How do i find this ? thx a lot
_________________
--
CSi
|
|
| Back to top |
|
|
