NotePage, Inc. Forum Index

Move database to new server

 
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> PageGate Support
View previous topic :: View next topic  
Author Message
rbradley



Joined: 24 May 2024
Posts: 3
Location: Denison, Iowa

PostPosted: Fri May 24, 2024 9:49 am    Post subject: Move database to new server Reply with quote

We are in the processing of decommissioning the server that PageGate Version 7 currently runs on. We have purchased Version 10 and will be installing it on a new server. Is it possible to transfer my settings, users, and groups to the new server, and between the version and if so how?


Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4358

PostPosted: Fri May 24, 2024 10:02 am    Post subject: Reply with quote

The information is entirely transferrable and here are the steps you'll want to run through:

1) On the old PageGate server, make a backup copy of the PageGate database (file name: pagegate.mdb). To determine where the file is located, open the PageGate Admin and go to Program - Settings.

2) On the new server, install PageGate version 10.
Specific steps to install can be found here:
https://www.notepage.net/manuals/pg/v10/server/html/installation_by_single_executa_2.htm
https://www.notepage.net/videos/pagegate-v10-installation.htm

3) After installing PageGate version 10, right click on the shortcut for the PageGate Admin and left click 'Run as Administrator'

4) When prompted for the default setup information, click Apply.

5) When it prompts you to create a few directories, please do so.

6) You should then receive a notification that a new database has been created. Click OK.

7) Copy the old server's database in to the PageGate version 10 server's database directory.

8) When prompted, you do want to overwrite the existing file.

9) Right click on the shortcut for the PageGate Admin and left click 'Run as Administrator'

10) When prompted, you do want to upgrade the database.

11) After the upgrade is finished, you'll be prompted for your version 10 registration key. Enter it and click Apply.

12) Click OK, then Close, then OK again.

13) Right click on the shortcut for the PageGate Admin and left click 'Run as Administrator'

14) Go to Program - Settings.

15) In the 'Run PageGate as' section, select: Windows Service

16) Click Apply.

17) When prompted for credentials, leave them blank and click Apply again.

18) When 'Switching Run Styles' goes away, open the Windows Services list.

19) Find and start the PageGate service, if it hasn't already started.

If you need anything else, please let us know!



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
rbradley



Joined: 24 May 2024
Posts: 3
Location: Denison, Iowa

PostPosted: Fri May 24, 2024 10:15 am    Post subject: Reply with quote

Thank you for the quick response. I will give this a shot next week and will reach back out afterwards.


Back to top
View user's profile
rbradley



Joined: 24 May 2024
Posts: 3
Location: Denison, Iowa

PostPosted: Wed May 29, 2024 5:11 pm    Post subject: Reply with quote

Got this completed today. Directions were easy to follow. I appreciate the help.


Back to top
View user's profile
Display posts from previous:   
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> PageGate Support All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group
Theme created by Vjacheslav Trushkin