| View previous topic :: View next topic |
| Author |
Message |
bailey99
Joined: 18 Apr 2016
Posts: 12
|
 Posted: Tue Apr 19, 2016 12:16 pm Post subject: GetAscii paging attempt failing |
 |
|
I have been tasked with completing a proof of concept for using PageGate as our automated paging software. I am trying to set up an SMS process as follows:
Interface - GetAscii - verified that it is working
Carrier - initially AT&T
Settings: Protocol - SNPP
Host - snpp.att.net
Port - 444
MaxChars 300
Connector1
Setings: Init String (auto)
Dialing Prefix <blank>
Dedicated Carrier (none)
Serial Port 1
Direct Connect <blank>
When I place the message file in the polling directory it is picked up as expected, however in the Connector Log I keep getting the following:
******************************
Start connection to carrier ATT
Connect using SNPP protocol
Unable to connect to carrier
Disconneted from server
***************************
Could someone please let me know if I have things configured correctly and/or how I can go about troubleshooting this?
thx very much,
|
|
| Back to top |
|
Tech Support
Joined: 25 Aug 2003
Posts: 4370
|
| Posted: Tue Apr 19, 2016 1:13 pm Post subject: |
|
|
It could be that port 444 is not open for outbound connections.
Here is a way you can test that.
At a command prompt (DOS prompt) type:
telnet snpptest.notepage.com 444
You should get this back:
220 Gateway Ready |
|
| Back to top |
|
bailey99
Joined: 18 Apr 2016
Posts: 12
|
| Posted: Fri Apr 22, 2016 10:58 am Post subject: |
|
|
we can get the 220 gateway ready via telnet but when we try to send an ascii text file we are still getting
Unable to connect to Carrier
our firewall folks have assured me the port is enabled for SNPP
any help would be greatly appreciated.
|
|
| Back to top |
|
Tech Support
Joined: 25 Aug 2003
Posts: 4370
|
| Posted: Fri Apr 22, 2016 11:00 am Post subject: |
|
|
| If you would, please email the c:\PageGateData\Logs\*.log files from the server to support at notepage dot com so we can have a look at everything in context. |
|
| Back to top |
|
bailey99
Joined: 18 Apr 2016
Posts: 12
|
| Posted: Fri Apr 22, 2016 12:58 pm Post subject: |
|
|
| looks like we were one IP short in our list. We can now get to the snpp site and will move forward with completing the project. thanks very much for your help.
|
|
| Back to top |
|
bailey99
Joined: 18 Apr 2016
Posts: 12
|
| Posted: Fri Apr 22, 2016 4:32 pm Post subject: |
|
|
| we can now access the Sprint SNPP and SMTP sites but the messages are getting rejected. I will be sending all of our logs to the support@notepage site. Any help would be appreciated.
|
|
| Back to top |
|
OzCom
Joined: 22 Oct 2003
Posts: 1122
Location: US
|
| Posted: Sat Apr 23, 2016 9:28 am Post subject: |
|
|
Sprint will not accept SNPP traffic until you pre-register with them as an authorized sender_________________ Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate |
|
| Back to top |
|
OzCom
Joined: 22 Oct 2003
Posts: 1122
Location: US
|
|
| Back to top |
|
|
