NotePage, Inc. Forum Index

Stactic Sender

 
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> PageGate Support
View previous topic :: View next topic  
Author Message
qedadmin



Joined: 07 Jul 2008
Posts: 8

PostPosted: Mon Jun 23, 2014 3:43 pm    Post subject: Stactic Sender Reply with quote

I have a client running PageGate version 5.x
When I change the SENDER to a static entry messages continue to go out with whatever SENDER is entered at the time the message is created. I have edited the entry and saved the SENDER as "static". I have stopped and restarted all the PageGate services in Windows.


Back to top
View user's profile Visit poster's website
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Mon Jun 23, 2014 3:51 pm    Post subject: Reply with quote

What operating system is that workstation using?



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
qedadmin



Joined: 07 Jul 2008
Posts: 8

PostPosted: Mon Jun 23, 2014 5:15 pm    Post subject: Reply with quote

Sorry - This is the Server software and I have change the sender to static for each of the enabled interfaces.

The system is running Windows 2003 Sp2.


Back to top
View user's profile Visit poster's website
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Tue Jun 24, 2014 8:37 am    Post subject: Reply with quote

Ah, that changes things a bit. Which interface are you trying to set the static sender's name for?



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
qedadmin



Joined: 07 Jul 2008
Posts: 8

PostPosted: Tue Jun 24, 2014 9:43 am    Post subject: Reply with quote

I have set the static sender parameter in the GetAscii interface as "scctxt@co.somerset.nj.us" following the instructions in:

http://www.notepage.net/manuals/pg/v7/server/html/ascsender.htm?zoom_highlightsub=static%2Bsender.

However even after I have restarted the PageGate services the outgoing messages still show whatever sender address that was entered by the user.


Back to top
View user's profile Visit poster's website
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Tue Jun 24, 2014 9:52 am    Post subject: Reply with quote

Ah, that's the correct behavior. The Static Sender in the GetAscii module only sets the Sender value for the GetAscii module. The same holds true for all of the Interfaces, their respective Static Sender values only hold that value for the Interface in question.

So, when the your users send messages, which interface are they using?



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
qedadmin



Joined: 07 Jul 2008
Posts: 8

PostPosted: Wed Jun 25, 2014 12:17 pm    Post subject: Reply with quote

I am not sure I understand "that's the correct behavior". So the does the static entry in the GetAscii interface "not" strip out the user entered SENDER and replace it with the static SENDER?


Back to top
View user's profile Visit poster's website
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Wed Jun 25, 2014 1:22 pm    Post subject: Reply with quote

That depends on how you're sending your messages. If the messages are being sent from the PageGate Client on your workstations, the Static Sender value for the GetAscii module will not override the Sender value specified in the client. The Senders names are unique to each module.

So, how do your people send your messages? Do you integrate PageGate with a CAD system, for example, or do your users use the PageGate Client on their workstations?



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
qedadmin



Joined: 07 Jul 2008
Posts: 8

PostPosted: Wed Jul 02, 2014 8:49 am    Post subject: Reply with quote

Thank you for the update. This system's PageGate is getting most of the GetAscii messages sent out from an integrated CAD system. They do also use their client workstations to send out individual messages as well. I can let the admin there know that he has to set a static sender on his workstations as well for the individual messaging.

I am migrating them to a new physical server today. I will update you on the status of the static sender after the migration is completed.


Back to top
View user's profile Visit poster's website
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Wed Jul 02, 2014 8:59 am    Post subject: Reply with quote

The PageGate Client has its own Sender's value that will need to be set. All you'll need to do is open the Client, go to File - Setup and you'll see the Sender's Name field.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
Display posts from previous:   
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> PageGate Support All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group
Theme created by Vjacheslav Trushkin