View previous topic :: View next topic |
Author |
Message |
v34
Joined: 16 Mar 2012 Posts: 5
|
Posted: Fri Mar 16, 2012 2:18 am Post subject: how do i make i outgoing call ? |
|
|
im trying to make an alert escalation and one of them is an outgoing call.
BUT, i only get 1 (one) outgoing signal, then my modem hangs up , no errors. i really would like it to keep ringing to someone answers.
is that possible ?
im using notepager pro and i have setup a carrier with the following:
carrier name: RING
protocol: tone
init string: at6s7=5
max chars: 10
wait string: ,,
outgoing call log:
2012-03-16 08:11:00 ====================================
2012-03-16 08:11:00 Start connection to carrier: RING
2012-03-16 08:11:00 Working on message from to Service outging call
2012-03-16 08:11:00 Deliver using touch tones
2012-03-16 08:11:00 Formatting message
2012-03-16 08:11:00 Setting communication parameters
2012-03-16 08:11:01 Sent:AT<CR>
2012-03-16 08:11:02 Attempting to reset modem
2012-03-16 08:11:04 Sent:AT<CR>
2012-03-16 08:11:05 Received:K<CR><LF>
2012-03-16 08:11:05 modem reset
2012-03-16 08:11:05 Attempting to send carrier init string
2012-03-16 08:11:05 Sent:AT&S7=5<CR>
2012-03-16 08:11:16 Received:<LF>
2012-03-16 08:11:16 Unable to send carrier init string
2012-03-16 08:11:16 Sending touch tones: ATDT0046706595555,,555;^
2012-03-16 08:11:17 Sent:ATDT0046706555555,,555;<CR>
2012-03-16 08:11:22 Received:<CR><LF>OK<CR><LF>
2012-03-16 08:11:23 Hanging up modem
2012-03-16 08:11:24 Sent:ath0<CR>
2012-03-16 08:11:27 Received:<LF>
2012-03-16 08:11:27 Sent:ath0<CR>
2012-03-16 08:11:30 Received:<LF>
2012-03-16 08:11:30 modem hung up
2012-03-16 08:11:30 SUCCESSFUL To:Service outgoing call Msg:555
/Peter
|
|
Back to top |
|
Tech Support
Joined: 25 Aug 2003 Posts: 4372
|
Posted: Fri Mar 16, 2012 8:09 am Post subject: |
|
|
Peter,
Are you trying to deliver a page or SMS message? Or do you want the program to dial a phone number and deliver a series of tones? |
|
Back to top |
|
v34
Joined: 16 Mar 2012 Posts: 5
|
Posted: Fri Mar 16, 2012 8:37 am Post subject: |
|
|
Tech Support wrote: |
Peter,
Are you trying to deliver a page or SMS message? Or do you want the program to dial a phone number and deliver a series of tones? |
Hi again!
i just want it to dial until somone answers.
now it dials a very very short signal .
is it possible ?
/peter
|
|
Back to top |
|
Tech Support
Joined: 25 Aug 2003 Posts: 4372
|
Posted: Fri Mar 16, 2012 8:43 am Post subject: |
|
|
Peter,
If I correctly understand what you're referring to, the program doesn't actually have a way to dial until someone answers. It can dial a number but if nothing answers after a few rings, the program will hang up as it assumes that it won't receive a response. |
|
Back to top |
|
v34
Joined: 16 Mar 2012 Posts: 5
|
Posted: Fri Mar 16, 2012 8:49 am Post subject: |
|
|
Tech Support wrote: |
Peter,
It can dial a number but if nothing answers after a few rings, the program will hang up as it assumes that it won't receive a response. |
okey, now its "a quarter" of a signal ...really short almost nothing , the ath0 is really quick ...
can i use the "wait string" for something useful (in the edit carrier menu) for this ?
/Peter
|
|
Back to top |
|
Tech Support
Joined: 25 Aug 2003 Posts: 4372
|
Posted: Fri Mar 16, 2012 9:29 am Post subject: |
|
|
Right, the Wait String is for increasing tha mount of time the program waits before transmitting the first tone. Try putting an extra , or two in the wait string and let's see if that helps. |
|
Back to top |
|
|