NotePage, Inc. Forum Index

how do i make i outgoing call ?

 
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> NotePager Pro Support
View previous topic :: View next topic  
Author Message
v34



Joined: 16 Mar 2012
Posts: 5

PostPosted: Fri Mar 16, 2012 2:18 am    Post subject: how do i make i outgoing call ? Reply with quote

im trying to make an alert escalation and one of them is an outgoing call.

BUT, i only get 1 (one) outgoing signal, then my modem hangs up , no errors. i really would like it to keep ringing to someone answers.

is that possible ?

im using notepager pro and i have setup a carrier with the following:
carrier name: RING
protocol: tone
init string: at6s7=5
max chars: 10
wait string: ,,


outgoing call log:

2012-03-16 08:11:00 ====================================
2012-03-16 08:11:00 Start connection to carrier: RING
2012-03-16 08:11:00 Working on message from to Service outging call
2012-03-16 08:11:00 Deliver using touch tones
2012-03-16 08:11:00 Formatting message
2012-03-16 08:11:00 Setting communication parameters
2012-03-16 08:11:01 Sent:AT<CR>
2012-03-16 08:11:02 Attempting to reset modem
2012-03-16 08:11:04 Sent:AT<CR>
2012-03-16 08:11:05 Received:K<CR><LF>
2012-03-16 08:11:05 modem reset
2012-03-16 08:11:05 Attempting to send carrier init string
2012-03-16 08:11:05 Sent:AT&S7=5<CR>
2012-03-16 08:11:16 Received:<LF>
2012-03-16 08:11:16 Unable to send carrier init string
2012-03-16 08:11:16 Sending touch tones: ATDT0046706595555,,555;^
2012-03-16 08:11:17 Sent:ATDT0046706555555,,555;<CR>
2012-03-16 08:11:22 Received:<CR><LF>OK<CR><LF>
2012-03-16 08:11:23 Hanging up modem
2012-03-16 08:11:24 Sent:ath0<CR>
2012-03-16 08:11:27 Received:<LF>
2012-03-16 08:11:27 Sent:ath0<CR>
2012-03-16 08:11:30 Received:<LF>
2012-03-16 08:11:30 modem hung up
2012-03-16 08:11:30 SUCCESSFUL To:Service outgoing call Msg:555

/Peter


Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4041

PostPosted: Fri Mar 16, 2012 8:09 am    Post subject: Reply with quote

Peter,

Are you trying to deliver a page or SMS message? Or do you want the program to dial a phone number and deliver a series of tones?



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
v34



Joined: 16 Mar 2012
Posts: 5

PostPosted: Fri Mar 16, 2012 8:37 am    Post subject: Reply with quote

Tech Support wrote:
Peter,

Are you trying to deliver a page or SMS message? Or do you want the program to dial a phone number and deliver a series of tones?


Hi again!

i just want it to dial until somone answers.

now it dials a very very short signal .

is it possible ?
/peter


Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4041

PostPosted: Fri Mar 16, 2012 8:43 am    Post subject: Reply with quote

Peter,

If I correctly understand what you're referring to, the program doesn't actually have a way to dial until someone answers. It can dial a number but if nothing answers after a few rings, the program will hang up as it assumes that it won't receive a response.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
v34



Joined: 16 Mar 2012
Posts: 5

PostPosted: Fri Mar 16, 2012 8:49 am    Post subject: Reply with quote

Tech Support wrote:
Peter,
It can dial a number but if nothing answers after a few rings, the program will hang up as it assumes that it won't receive a response.



okey, now its "a quarter" of a signal ...really short almost nothing , the ath0 is really quick ...


can i use the "wait string" for something useful (in the edit carrier menu) for this ?

/Peter


Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4041

PostPosted: Fri Mar 16, 2012 9:29 am    Post subject: Reply with quote

Right, the Wait String is for increasing tha mount of time the program waits before transmitting the first tone. Try putting an extra , or two in the wait string and let's see if that helps.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
Display posts from previous:   
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> NotePager Pro Support All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group
Theme created by Vjacheslav Trushkin