NotePage, Inc. Forum Index

MKT GPRS USB modem error

 
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> PageGate Support
View previous topic :: View next topic  
Author Message
AROY



Joined: 16 Jan 2010
Posts: 1

PostPosted: Sun Jan 17, 2010 12:14 am    Post subject: MKT GPRS USB modem error Reply with quote

While connecting through MKT GPRS modem show a error code: 734 and in farther enquiry on modem log following digonastc has come out. How can i able to override this problem? Please heip.

01-17-2010 08:39:53.156 - File: C:\WINDOWS\system32\tapisrv.dll, Version 5.1.2600
01-17-2010 08:39:53.156 - File: C:\WINDOWS\system32\unimdm.tsp, Version 5.1.2600
01-17-2010 08:39:53.156 - File: C:\WINDOWS\system32\unimdmat.dll, Version 5.1.2600
01-17-2010 08:39:53.156 - File: C:\WINDOWS\system32\uniplat.dll, Version 5.1.2600
01-17-2010 08:39:53.156 - File: C:\WINDOWS\system32\drivers\modem.sys, Version 5.1.2600
01-17-2010 08:39:53.156 - File: C:\WINDOWS\system32\modemui.dll, Version 5.1.2600
01-17-2010 08:39:53.156 - File: C:\WINDOWS\system32\mdminst.dll, Version 5.1.2600
01-17-2010 08:39:53.156 - Modem type: MTK GPRS USB Modem
01-17-2010 08:39:53.156 - Modem inf path: oem55.inf
01-17-2010 08:39:53.156 - Modem inf section: Modem1
01-17-2010 08:39:53.156 - Matching hardware ID: usb\mtkusb
01-17-2010 08:39:53.187 - 9600,8,N,1, ctsfl=1, rtsctl=2
01-17-2010 08:39:53.218 - Initializing modem.
01-17-2010 08:39:53.218 - DSR is low while initializing the modem. Verify modem is turned on.
01-17-2010 08:39:53.234 - Send: AT<cr>
01-17-2010 08:39:53.234 - Recv: <cr><lf>OK<cr><lf>
01-17-2010 08:39:53.234 - Interpreted response: OK
01-17-2010 08:39:53.250 - Send: ATE0V1<cr>
01-17-2010 08:39:53.250 - Recv: <cr><lf>OK<cr><lf>
01-17-2010 08:39:53.250 - Interpreted response: OK
01-17-2010 08:39:53.265 - Send: AT<cr>
01-17-2010 08:39:53.265 - Recv: <cr><lf>OK<cr><lf>
01-17-2010 08:39:53.265 - Interpreted response: OK
01-17-2010 08:39:53.265 - Waiting for a call.
01-17-2010 08:39:53.265 - Send: ATS0=0<cr>
01-17-2010 08:39:53.265 - Recv: <cr><lf>OK<cr><lf>
01-17-2010 08:39:53.265 - Interpreted response: OK
01-17-2010 08:39:53.265 - 9600,8,N,1, ctsfl=1, rtsctl=2
01-17-2010 08:39:53.296 - Initializing modem.
01-17-2010 08:39:53.296 - DSR is low while initializing the modem. Verify modem is turned on.
01-17-2010 08:39:53.312 - Send: AT<cr>
01-17-2010 08:39:53.312 - Recv: <cr><lf>OK<cr><lf>
01-17-2010 08:39:53.312 - Interpreted response: OK
01-17-2010 08:39:53.328 - Send: ATE0V1<cr>
01-17-2010 08:39:53.328 - Recv: <cr><lf>OK<cr><lf>
01-17-2010 08:39:53.328 - Interpreted response: OK
01-17-2010 08:39:53.343 - Send: AT<cr>
01-17-2010 08:39:53.343 - Recv: <cr><lf>OK<cr><lf>
01-17-2010 08:39:53.343 - Interpreted response: OK
01-17-2010 08:39:53.343 - Passthrough On
01-17-2010 08:39:54.750 - Passthrough Off
01-17-2010 08:39:54.750 - 9600,8,N,1, ctsfl=1, rtsctl=2
01-17-2010 08:39:54.781 - Initializing modem.
01-17-2010 08:39:54.781 - DSR is low while initializing the modem. Verify modem is turned on.
01-17-2010 08:39:54.796 - Send: AT<cr>
01-17-2010 08:39:54.796 - Recv: AT<cr>
01-17-2010 08:39:54.796 - Command Echo
01-17-2010 08:39:54.796 - Recv: <cr><lf>OK<cr><lf>
01-17-2010 08:39:54.796 - Interpreted response: OK
01-17-2010 08:39:54.812 - Send: ATE0V1<cr>
01-17-2010 08:39:54.812 - Recv: ATE0V1<cr>
01-17-2010 08:39:54.812 - Command Echo
01-17-2010 08:39:54.812 - Recv: <cr><lf>OK<cr><lf>
01-17-2010 08:39:54.812 - Interpreted response: OK
01-17-2010 08:39:54.828 - Send: AT<cr>
01-17-2010 08:39:54.828 - Recv: <cr><lf>OK<cr><lf>
01-17-2010 08:39:54.828 - Interpreted response: OK
01-17-2010 08:39:54.828 - Dialing.
01-17-2010 08:39:54.843 - Send: ATDT*##***##<cr>
01-17-2010 08:39:54.843 - Recv: <cr><lf>CONNECT<cr><lf>
01-17-2010 08:39:54.843 - Interpreted response: Connect
01-17-2010 08:39:54.843 - Receive Connect but CD was low, Waiting for signal to go high
01-17-2010 08:39:54.859 - CD has been raised
01-17-2010 08:39:54.875 - Connection established at 9600bps.
01-17-2010 08:39:54.875 - Error-control off or unknown.
01-17-2010 08:39:54.875 - Data compression off or unknown.
01-17-2010 08:40:03.046 - CD dropped--Remote modem hung up. ModemStatus=00000010
01-17-2010 08:40:03.046 - While processing CD dropping, CTS or DSR was found low.
01-17-2010 08:40:03.046 - Hanging up the modem.
01-17-2010 08:40:04.046 - Timed out waiting for response from modem
01-17-2010 08:40:04.062 - Send: ATH<cr>
01-17-2010 08:40:04.062 - Recv: <cr><lf>OK<cr><lf>
01-17-2010 08:40:04.062 - Interpreted response: OK
01-17-2010 08:40:04.062 - 9600,8,N,1, ctsfl=1, rtsctl=2
01-17-2010 08:40:04.093 - Initializing modem.
01-17-2010 08:40:04.093 - DSR is low while initializing the modem. Verify modem is turned on.
01-17-2010 08:40:04.109 - Send: AT<cr>
01-17-2010 08:40:04.109 - Recv: <cr><lf>OK<cr><lf>
01-17-2010 08:40:04.109 - Interpreted response: OK
01-17-2010 08:40:04.125 - Send: ATE0V1<cr>
01-17-2010 08:40:04.125 - Recv: <cr><lf>OK<cr><lf>
01-17-2010 08:40:04.125 - Interpreted response: OK
01-17-2010 08:40:04.125 - Send: AT<cr>
01-17-2010 08:40:04.140 - Recv: <cr><lf>OK<cr><lf>
01-17-2010 08:40:04.140 - Interpreted response: OK
01-17-2010 08:40:04.140 - Waiting for a call.
01-17-2010 08:40:04.140 - Send: ATS0=0<cr>
01-17-2010 08:40:04.140 - Recv: <cr><lf>OK<cr><lf>
01-17-2010 08:40:04.140 - Interpreted response: OK
01-17-2010 08:40:04.140 - Session Statistics:
01-17-2010 08:40:04.140 - Reads : 0 bytes
01-17-2010 08:40:04.140 - Writes: 0 bytes
ATQ0V1E0 - OK
AT+GMM - +CGMM: MTK2
AT+FCLASS=? - (0, 1, 2, 2.0)
AT#CLS=? - COMMAND NOT SUPPORTED
AT+GCI? - COMMAND NOT SUPPORTED
AT+GCI=? - COMMAND NOT SUPPORTED
ATI1 - MTK2
T588_GSD_1_1_3T04S0612
ATI2 - MTK2
T588_GSD_1_1_3T04S0612
ATI3 - MTK2
T588_GSD_1_1_3T04S0612
ATI4 - MTK2
T588_GSD_1_1_3T04S0612
ATI5 - MTK2
T588_GSD_1_1_3T04S0612
ATI6 - MTK2
T588_GSD_1_1_3T04S0612
ATI7 - MTK2
T588_GSD_1_1_3T04S0612
ATQ0V1E0 - OK
AT+GMM - +CGMM: MTK2
AT+FCLASS=? - (0, 1, 2, 2.0)
AT#CLS=? - COMMAND NOT SUPPORTED
AT+GCI? - COMMAND NOT SUPPORTED
AT+GCI=? - COMMAND NOT SUPPORTED
ATI1 - MTK2
T588_GSD_1_1_3T04S0612
ATI2 - MTK2
T588_GSD_1_1_3T04S0612
ATI3 - MTK2
T588_GSD_1_1_3T04S0612
ATI4 - MTK2
T588_GSD_1_1_3T04S0612
ATI5 - MTK2
T588_GSD_1_1_3T04S0612
ATI6 - MTK2
T588_GSD_1_1_3T04S0612
ATI7 - MTK2
T588_GSD_1_1_3T04S0612


Back to top
View user's profile AIM Address
OzCom



Joined: 22 Oct 2003
Posts: 1122
Location: US

PostPosted: Sun Jan 17, 2010 7:12 am    Post subject: Reply with quote

It appears that you have insufficient cellular signal. Try this command from Hyperterminal: AT+CSQ

Post results



_________________
Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate
Back to top
View user's profile Send e-mail Visit poster's website AIM Address Yahoo Messenger MSN Messenger
Display posts from previous:   
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> PageGate Support All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group
Theme created by Vjacheslav Trushkin