NotePage, Inc. Forum Index

PAGEGATE and ID/PIN issue

 
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> PageGate Support
View previous topic :: View next topic  
Author Message
yradid



Joined: 25 Nov 2008
Posts: 2
Location: Lyon - France

PostPosted: Wed Nov 26, 2008 2:45 am    Post subject: PAGEGATE and ID/PIN issue Reply with quote

hello, I have an issue with the software pagegate:
the phone number for the recipient ( ID/PIN) has 10 digits, but the software transmits only the last 9 digits.
Sent:AT<CR>
26/11/2008 08:11:27 Received:<CR><LF>OK<CR><LF>
26/11/2008 08:11:27 Modem reset
26/11/2008 08:11:27 Attempting to send dialer init string
26/11/2008 08:11:27 Sent:ATE1Q0X4&M4&N6S0=0<CR>
26/11/2008 08:11:28 Received:<CR><LF>OK<CR><LF>
26/11/2008 08:11:28 Dialer init string sent
26/11/2008 08:11:28 Attempting to send carrier init string
26/11/2008 08:11:29 Sent:AT&F0Q0V1X4&D2&B1&K0&M0&N3<CR>
26/11/2008 08:11:29 Received:<CR><LF>OK<CR><LF>
26/11/2008 08:11:30 Carrier init string sent
26/11/2008 08:11:30 Dialing carrier
26/11/2008 08:11:30 Sent:ATDT00836601234<CR>
26/11/2008 08:11:38 Waiting for connection
26/11/2008 08:11:43 Received:<CR><LF>CONNECT 2400<CR><LF>
26/11/2008 08:11:43 Connected to carrier
26/11/2008 08:11:43 Waiting for protocol initialization
26/11/2008 08:11:48 Sent:<CR>
26/11/2008 08:11:48 Received:ID=<CR>
26/11/2008 08:11:48 TAP protocol detected
26/11/2008 08:11:49 Sent:<ESC>PG1<CR>
26/11/2008 08:11:49 Received:Identification acceptee<CR><ACK><CR><ESC>[p<CR>
26/11/2008 08:11:50 Received:Identification acceptee<CR><ACK><CR><ESC>[p<CR>
26/11/2008 08:11:50 Automatic TAP mode accepted
26/11/2008 08:11:50 ----------------------------------------
26/11/2008 08:11:50 Working on message to: pager_de_test from: ddyc
26/11/2008 08:11:50 Formatting message
26/11/2008 08:11:50 Message contained in single packet
26/11/2008 08:11:50 Message contained in single block
26/11/2008 08:11:50 Sending block
26/11/2008 08:11:50 Sent:<STX>657475741<CR>ddyc:test test<CR><ETX>77;<CR>
26/11/2008 08:11:51 Received:Bloc 1 correct<CR><ACK><CR>

it seems that the software transmits only the last 9 digits of the ID/PIN
thank you for your help

Charles DIDARY
EDF - CTI de Lyon


Back to top
View user's profile
OzCom



Joined: 22 Oct 2003
Posts: 1123
Location: US

PostPosted: Wed Nov 26, 2008 7:11 am    Post subject: Reply with quote

Look under the ADVANCED tab of the carrier - make sure the PIN length has not been set to 9



_________________
Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate
Back to top
View user's profile Send e-mail Visit poster's website AIM Address Yahoo Messenger MSN Messenger
yradid



Joined: 25 Nov 2008
Posts: 2
Location: Lyon - France

PostPosted: Wed Nov 26, 2008 7:42 am    Post subject: Reply with quote

thank you for your prompt response, I adjusted the setting and everything is correct

with all my thanks, cordially

Charles DIDARY
EDF - CTI de Lyon

France


Back to top
View user's profile
Display posts from previous:   
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> PageGate Support All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group
Theme created by Vjacheslav Trushkin