Integration with Spotted Dog Technologies Rover

Step 1 — Configure Rover-PRIMARY (WCTP)

1. Run PG Admin.
2. Right click Carriers, select Add.
3. Specify the following:

   Carrier: Rover
   Protocol: WCTP
   Host: websvc.spotteddogtech.com/Rover.WCTP
   Port: 443
   Max Chars: 6000
4. Go to Carriers — Rover — Advanced. Set Priority to: 1. Click Apply.

Step 2 — Configure Rover-SECONDARY (SMTP Failover)

1. Right click Carriers, select Add.
2. Specify the following:

   Carrier: Rover-SECONDARY
   Protocol: SMTP
   Host: rover.spotteddogtech.com
   Port: [Port required by your SMTP server]
   Max Chars: 6000
3. Go to Carriers — Rover-SECONDARY — Advanced. Select Deliver through outgoing mail server, enter SMTP server address, credentials. Set Priority to: 1. Click Apply.
4. Go to Carriers — Rover-SECONDARY — Template. In Settings enter:

   From = [username]
   EXAMPLE: From = CAD@notepage.com
5. Click Apply.

Step 3 — Configure Failover

1. Go to Carriers — Rover — Advanced. Set Failover to: Rover-SECONDARY. Click Apply.

Step 4 — Create Recipients

1. Right click Recipients, select Add.
2. Specify the following:

   Full Name: [Agency being messaged]
   Type: Normal
   Carrier: Rover
   ID/PIN: Enter the Rover ID (Example: Value@rover.spotteddogtech.com)
   Max Chars: 6000

   When integrating with a CAD system, the Recipient field must reflect CAD's name for this recipient.
3. Click Apply.