Integration with Spok On-Site Paging

Configure PageGate to Output to the Spok Terminal

1. Open PageGate Admin. Go to Connectors — Connector X — Settings.

   Any connector can be configured to reference a paging terminal.
2. Set Serial Port to match the COM/Serial port the terminal is plugged in to. Check Direct Connect. Click Apply.
3. Right click Carriers, left click Add. Specify the following:

   Name: SPOK
   Protocol: TAP
   Baud Rate: [Mirror terminal's setting]
   Parity: [Mirror terminal's setting]
   Data Bits: [Mirror terminal's setting]
   Stop Bits: [Mirror terminal's setting]
   Init String: direct
4. Click Apply. Configure recipients using the pager's cap code or ID in the ID/PIN field.

Configure PageGate to Receive Input from Spok (GetTAP)

1. Open PageGate Admin. Go to Interfaces — GetTAP — Settings.
2. Set Serial Port and mirror all port settings from the terminal. Set Init String to: direct
3. Check Enabled. Click Apply. Enable for all groups and recipients when prompted.