Configuration

In PG Admin:
PageGate's Admin program is used to setup the IP address(s) or host name(s) for the workstation(s) that will run PG Monitor

1. Choose the 'Settings' object from under the 'Logging' object

2. Check 'Enable PG Monitor'

3. Enter the TCP/IP port number you want to use (10101 by default) into the 'PG Monitor Port' field.

4. Enter the IP address or host name of the workstation that is to run PG Monitor into one of the 'PG Monitor Host' fields.

5. Apply your changes

***Note: is some cases if a bad IP address or host name is entered, the PageGate Server's performance may suffer.

In PG Monitor
No initial settings are needed unless you are using a different TCP/IP port than the default (10101). To change the port number, choose 'Settings' from the 'File' menu.