|
To configure the Ad-Hoc GetMail function to accept messages addressed to the device you wish to contact:
| 1. | Create a new recipient and set its Type to Ad-Hoc. |
| 2. | Make sure that GetMail is checked under the Enabled Services section of the recipient. |
| 3. | Select the carrier that messages addressed to your paging recipients should be sent to via the Ad-Hoc function. |
| 4. | Once the Recipient has been configured, put a check in "Enable Ad-Hoc Mail". |
| 5. | Click on the Add button. |
| 6. | Enter the Starting ID/PIN. |
| 7. | Enter the Ending ID/PIN. |
| 8. | Select an Ad-Hoc Recipient from the drop-down menu. |
|
|
To use this method with email, simply address an email message to the PageGate Server's Local Domain with an ID/PIN number (within the range set in steps 6 and 7 above) as the part of the email address before the @ (i.e. 1234567@mypagegateserver.com).
|