Top Previous Next |
This protocol allows you to tell PageGate to send a fax using a fax capable dial-up modem.
NOTE: While not absolutely required, we would recommend creating a Faxing Template for any FAX Carriers you create.
1)Right click Carriers. 2)Select Add. 3)Select the FAX protocol. 4)Enter a name in the Carrier field. 5)Set the Init String field to: (auto) 6)Set the Fax Class required by the receiving fax machine(s). 7)Set the Max Chars value to: 6000 8)Click Apply. 9)Go to Connectors - Connector X - Settings. Note: Any connector can use a modem but a connector can only be tied to one modem at a time. Multiple connectors cannot reference the same modem. 10) Set the Serial Port field to match the COM port of your modem. 11) Click Apply. |