Setting |
Function |
Polling Interval |
This field determines how often the connector system polls the database for updates to the messages table of the database from the Scheduler. |
When implementing a cellular modem, router or gateway, this field determines how often the connector system should poll the modem for reply messages in memory. |
|
Msg Threshold |
This field determines how many messages need to be in 'Pending' before the next connector in sequence is activated. Setting the Msg Threshold to 1 will evenly load balance all messages across all connectors.
For example, let's say that you have the Dial Threshold set to 20 and that both Connectors 1 and 2 are enabled. Then let's say you queue 30 messages for PageGate to deliver. Connector 1 will first 20 and give the next 10 to Connector2 for processing. |
Retries |
This determines the number of attempts the Connectors will make when delivering a message. If a message cannot be delivered after the specified number of retries, it is marked bad. |
Retry Interval |
This field determines how long each Connector waits between successive retries. |
Apply |
This button saves any changes recently made to the Global Settings of the Connectors. |