Modem Settings

Top  Previous  Next

The 'Modem Settings' screen allows you to change settings that control how NotePager Pro uses your modem.


The 'Modem Port' field is used to set the serial port that your modem is attached to.


The 'Dialing Prefix' field is used if the phone line your modem is using requires a code to be dialed to get an 'outside' dialtone.  The most common setting for this (other than leaving it blank) would be: 9,


The 'Retries' field sets the number of times a failed message should be retried before the message is permanently marked as bad.


The 'Retry Interval' field sets how long NotePager Pro should pause (in seconds) between retries.