How do I set up a TAP Carrier in PageGate?

How do I set up a TAP Carrier in PageGate?

1) Open the PageGate Admin.

2) Right click on Carriers, left click on Add.

3) Name the Carrier what it needs to be (T-mobile, Cingular, Verizon, etc).

4) Set the Protocol to TAP.

5) In the phone number, you'll need to entire the phone number for one of the TAP Terminals hosted by the carrier. You can find a list of TAP Terminal phone numbers at the following
location: https://www.notepage.net/tap-phone-numbers.htm

6) Once the phone number is entered, set the baud rate, parity, data bits, and stop bits to the carrier's specifications. If the carrier doesn't specify what these settings are, the industry standard is as follows:
Baud Rate: 1200
Parity: Even
Data Bits: 7
Stop Bits: 1

7) Set the init string to (auto)

8) Click on Apply to have it add the carrier into the list.

Knowledgebase RSS Feed

-