Skytel how do I set-up wctp

[Swamprat]

Please help me with how I can set wctp for my skytel pagers with your soft ware.

[Tech Support]

It depends on which program you're using.

If you're using NotePager, try this:

1) Go to Carriers
2) Click on Add.
3) In the Carrier name, put SkytelWCTP
4) Change the Protocol to WCTP
5) In host, type: wctp.skytel.com/wctp
6) Leave the Password blank.
7) Leave the Port at 80.
8) Change the Max Chars to 500.
9) Leave the Msg Limit blank.
10) Click on Apply.

That will configure NotePager to use a WCTP based Skytel Carrier.

If you're using PageGate, you'll want to do the exact same set of steps as above, however, you'll need to be in the PageGate Admin and you'll right click on the Carriers listing.