| View previous topic :: View next topic |
| Author |
Message |
Notepage rookie
Joined: 28 Sep 2005
Posts: 13
|
 Posted: Sun Nov 06, 2005 7:55 pm Post subject: Notepager pro |
 |
|
| When I try and send text messages at a set time later in the day by using the optins they dont always go through what am I doing wron because, when I am near the computer its works but when I am not it doesn't work .
|
|
| Back to top |
|
Tech Support
Joined: 25 Aug 2003
Posts: 4387
|
| Posted: Mon Nov 07, 2005 9:23 am Post subject: |
|
|
| Do the messages show up as 'Bad' in the program or do they get put in the Good category? Also, you mentioned that when you're near the computer, they work, but when you're not not, they don't. Is there anything that you're actively doing when you are in front of the system that could cause NotePager Pro to do anything differently? |
|
| Back to top |
|
Notepage rookie
Joined: 28 Sep 2005
Posts: 13
|
| Posted: Wed Nov 09, 2005 8:35 pm Post subject: |
|
|
| It just stays in the pending area and comes up out the blue hours or even days later. The only thing I can think of is that I use a laptop and use wireless internet to go online. So I was wondering if when I am not connected to the internet is that the problem with it going through.
|
|
| Back to top |
|
OzCom
Joined: 22 Oct 2003
Posts: 1122
Location: US
|
| Posted: Wed Nov 09, 2005 9:21 pm Post subject: |
|
|
The message can only be transmitted to the recipient's carrier's terminal when pagegate is connected to the outside world either via internet or via tap modem (depending on how you have the carrier set up)_________________ Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate |
|
| Back to top |
|
Notepage rookie
Joined: 28 Sep 2005
Posts: 13
|
| Posted: Thu Nov 10, 2005 9:47 pm Post subject: |
|
|
| I also cant figure out how to use SMTP and set it up as a carrier it just doesn't work for me.
|
|
| Back to top |
|
Tech Support
Joined: 25 Aug 2003
Posts: 4387
|
| Posted: Fri Nov 11, 2005 9:21 am Post subject: |
|
|
Here are the steps for creating an SMTP carrier and setting up a recipient for the SMTP carrier: .
1) Left click on the Carriers menu.
2) Left click on Add.
3) Name the carrier: SMTP
4) Change the Protocol to: SMTP
5) Your Local Domain needs to be set to the latter half of your email address. For example: notepage.com
6) Enter in your Primary DNS into DNS Server 1 and your Secondary DNS into DNS Server 2. If you're not sure what either of these are, please contact your internet service provider and ask them.
---------------------------------------------------------------------
1) Now that the Carrier has been added, left click on Recipients.
2) Left click on Add.
3) You can name the recipient whatever you like.
4) The Type should be normal and change the Carrier to SMTP.
5) In the "Email To" field, enter the email address for the device you're trying to contact. If you're not sure what the device's email address is, we do have a list at http://www.notepage.net/smtp.htm
6) Make sure that Alpha and Drop non-printable characters are cheked.
7) Click on Apply. |
|
| Back to top |
|
|
