NotePage, Inc. Forum Index

NotePager Pro - Verizon - WCTP - Invalid response from host

 
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> NotePager Pro Support
View previous topic :: View next topic  
Author Message
CLingle



Joined: 10 May 2005
Posts: 7

PostPosted: Tue May 10, 2005 6:17 pm    Post subject: NotePager Pro - Verizon - WCTP - Invalid response from host Reply with quote

Greetings,

In the interest in brevity, here are the specifics about my NotePager Pro (Version 3.0) issue:

Protocol: WCTP via internet
Pager Carrier: Verizon
WCTP Site: wctp.myairmail.com/wctp
Firewall: None (in this test environment)

As discussed in this forum, Verizon requires that you setup a user ID and password to authenticate to their WCTP server. I have done so.

I am receiving an “Invalid response from host” error message that I believe is related to how NotePage sends the user ID – it adds “@” to the end of the ID. Or perhaps I am on the wrong track here…

Below is the log (with IDs and Password changed). Any assistance would be greatly appreciated.

<NotePage Pro Log>

5/10/2005 4:54:22 PM ------------------------------------------------
5/10/2005 4:54:22 PM Start connection to carrier: Verizon
5/10/2005 4:54:22 PM Send using WCTP protocol
5/10/2005 4:54:22 PM ------------------------------------------------
5/10/2005 4:54:22 PM Working on message to: MyUser from: MySendersName
5/10/2005 4:54:22 PM Formatting message
5/10/2005 4:54:22 PM Message contained in single packet
5/10/2005 4:54:22 PM Sending message
5/10/2005 4:54:22 PM Sent:
5/10/2005 4:54:22 PM <?xml version="1.0"?>
5/10/2005 4:54:22 PM <!DOCTYPE wctp-Operation SYSTEM "http://dtd.wctp.org/wctp-dtd-v1r1.dtd">
5/10/2005 4:54:22 PM <wctp-Operation wctpVersion="wctp-dtd-v1r1">
5/10/2005 4:54:22 PM <wctp-SubmitClientMessage>
5/10/2005 4:54:22 PM <wctp-SubmitClientHeader submitTimestamp="2005-05-10T22:54:22">
5/10/2005 4:54:22 PM <wctp-ClientOriginator senderID="MySendersName@" miscInfo="MyVerizonPassword" />
5/10/2005 4:54:22 PM <wctp-ClientMessageControl preformatted="true" />
5/10/2005 4:54:22 PM <wctp-Recipient recipientID="3035551212" />
5/10/2005 4:54:22 PM </wctp-SubmitClientHeader>
5/10/2005 4:54:22 PM <wctp-Payload>
5/10/2005 4:54:22 PM <wctp-Alphanumeric> MySendersName:Test Message from Curt</wctp-Alphanumeric>
5/10/2005 4:54:22 PM </wctp-Payload>
5/10/2005 4:54:22 PM </wctp-SubmitClientMessage>
5/10/2005 4:54:23 PM </wctp-Operation>
5/10/2005 4:54:23 PM Recieved:
5/10/2005 4:54:23 PM <?xml version="1.0" encoding="UTF-8"?>
5/10/2005 4:54:23 PM <!DOCTYPE wctp-Operation SYSTEM "http://wctp.myairmail.com/wctp/wctp-dtd-v1r1.dtd">
5/10/2005 4:54:23 PM <wctp-Operation wctpVersion="wctp-dtd-v1r1.dtd" wctpToken="x226"><wctp-SubmitClientResponse><wctp-ClientSuccess successText="Message Accepted" successCode="200" trackingNumber="465357138"/></wctp-SubmitClientResponse></wctp-Operation>
5/10/2005 4:54:23 PM Invalid response from host
5/10/2005 4:54:23 PM Message retry limit reached
5/10/2005 4:54:23 PM FAILED To: MyUser Frm: MySendersName Msg:Test Message from Curt
5/10/2005 4:54:23 PM Carrier retry limit reached. Marking pending messages as bad


<Verizon description of what they expect>
From: http://wctp.myairmail.com/index.html

' <?xml version="1.0" encoding="UTF-8"?>
' <!DOCTYPE wctp-Operation
' SYSTEM "http://wctp.myairmail.com/wctp/wctp-dtd-v1r1.dtd">
' <wctp-Operation wctpVersion="wctp-dtd-v1r1">
' <wctp-SubmitRequest>
' <wctp-SubmitHeader submitTimestamp="2004-08-31T19:45:00">
' <wctp-Originator senderID="verizonCustomerLogin"
' securityCode="mySecretPassword"/>
' <wctp-MessageControl messageID="test00"/>
' <wctp-Recipient recipientID="8005551212"/>
' </wctp-SubmitHeader>
' <wctp-Payload>
' <wctp-Alphanumeric>Testing 123</wctp-Alphanumeric>
' </wctp-Payload>
' </wctp-SubmitRequest>
' </wctp-Operation>

Thank you in advance!

- Curt


Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Wed May 11, 2005 12:27 pm    Post subject: NotePager Pro - Verizon - WCTP - Invalid response from host Reply with quote

From the log, it actually looks like the message is being sent successfully, but NotePager Pro isn't realizing it.

Can you please email us at: support@notepage.com so we can send you an updated file to try?

Thanks.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
sebrewer



Joined: 27 Apr 2005
Posts: 5
Location: Toledo, OH

PostPosted: Wed Jun 08, 2005 11:31 am    Post subject: SMS to Verizon via WCTP Reply with quote

I would be interested in seeing this solution as well. Is there any way to specify a sender ID as well as a password when defining a WCTP carrier ?


Back to top
View user's profile
sebrewer



Joined: 27 Apr 2005
Posts: 5
Location: Toledo, OH

PostPosted: Wed Jun 08, 2005 11:43 am    Post subject: Reply with quote

... FYI, I'm using PageGate ... found this post while searching the forum. PageGate shows a different error message, indicating that the ClientOriginator is bad ...


Back to top
View user's profile
swmarlin



Joined: 06 Dec 2004
Posts: 2

PostPosted: Wed Jun 08, 2005 1:04 pm    Post subject: Reply with quote

I am interested in this answer as well. How do you set the username? I registered with verizon for use of wctp server. When I setup the carrier, instead of sending my "username" it sends a different username in the form of "user@domain.com".


Back to top
View user's profile
CLingle



Joined: 10 May 2005
Posts: 7

PostPosted: Mon Jan 09, 2006 5:23 pm    Post subject: Verizon User setup and patch Reply with quote

Greetings,

The fix for this problem was a patch from the NotePage, Inc. folks. As for the User setup, in our case, I used Tools -> Settings -> General -> Sender's Name. This matches the account created at Verizon. The password is stored in the Carrier record.

Hope this helps!

Peace.

- Curt


Back to top
View user's profile
claytaylorgreene



Joined: 24 Feb 2006
Posts: 3

PostPosted: Thu Mar 02, 2006 8:49 am    Post subject: Reply with quote

I'm now trying to use WCTP with Verizon and have the same problem. I'm registered with them but am receiving an error back "Invalid SenderID or Security Code". The software is putting the same '@' symbol after my SenderID. Where can I receive the updated file for NotePager that someone referred to in this post.
Thanks,
Clay


Back to top
View user's profile Visit poster's website
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Thu Mar 02, 2006 9:35 am    Post subject: Reply with quote

Send an email to support@notepage.com and we'll email you an updated dialer component for NotePager Pro.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
avolety



Joined: 29 Jul 2010
Posts: 1
Location: India

PostPosted: Thu Jul 29, 2010 12:33 am    Post subject: Re: NotePager Pro - Verizon - WCTP - Invalid response from h Reply with quote

Hello Curt,

DId you get any further information from TEch Support regarding this issue?

I am curious to know the final status of this post.

Could you please let me know.

Thanks a lot,
avolety
CLingle wrote:
Greetings,

In the interest in brevity, here are the specifics about my NotePager Pro (Version 3.0) issue:

Protocol: WCTP via internet
Pager Carrier: Verizon
WCTP Site: wctp.myairmail.com/wctp
Firewall: None (in this test environment)

As discussed in this forum, Verizon requires that you setup a user ID and password to authenticate to their WCTP server. I have done so.

I am receiving an “Invalid response from host” error message that I believe is related to how NotePage sends the user ID – it adds “@” to the end of the ID. Or perhaps I am on the wrong track here…

Below is the log (with IDs and Password changed). Any assistance would be greatly appreciated.

<NotePage Pro Log>

5/10/2005 4:54:22 PM ------------------------------------------------
5/10/2005 4:54:22 PM Start connection to carrier: Verizon
5/10/2005 4:54:22 PM Send using WCTP protocol
5/10/2005 4:54:22 PM ------------------------------------------------
5/10/2005 4:54:22 PM Working on message to: MyUser from: MySendersName
5/10/2005 4:54:22 PM Formatting message
5/10/2005 4:54:22 PM Message contained in single packet
5/10/2005 4:54:22 PM Sending message
5/10/2005 4:54:22 PM Sent:
5/10/2005 4:54:22 PM <?xml version="1.0"?>
5/10/2005 4:54:22 PM <!DOCTYPE wctp-Operation SYSTEM "http://dtd.wctp.org/wctp-dtd-v1r1.dtd">
5/10/2005 4:54:22 PM <wctp-Operation wctpVersion="wctp-dtd-v1r1">
5/10/2005 4:54:22 PM <wctp-SubmitClientMessage>
5/10/2005 4:54:22 PM <wctp-SubmitClientHeader submitTimestamp="2005-05-10T22:54:22">
5/10/2005 4:54:22 PM <wctp-ClientOriginator senderID="MySendersName@" miscInfo="MyVerizonPassword" />
5/10/2005 4:54:22 PM <wctp-ClientMessageControl preformatted="true" />
5/10/2005 4:54:22 PM <wctp-Recipient recipientID="3035551212" />
5/10/2005 4:54:22 PM </wctp-SubmitClientHeader>
5/10/2005 4:54:22 PM <wctp-Payload>
5/10/2005 4:54:22 PM <wctp-Alphanumeric> MySendersName:Test Message from Curt</wctp-Alphanumeric>
5/10/2005 4:54:22 PM </wctp-Payload>
5/10/2005 4:54:22 PM </wctp-SubmitClientMessage>
5/10/2005 4:54:23 PM </wctp-Operation>
5/10/2005 4:54:23 PM Recieved:
5/10/2005 4:54:23 PM <?xml version="1.0" encoding="UTF-8"?>
5/10/2005 4:54:23 PM <!DOCTYPE wctp-Operation SYSTEM "http://wctp.myairmail.com/wctp/wctp-dtd-v1r1.dtd">
5/10/2005 4:54:23 PM <wctp-Operation wctpVersion="wctp-dtd-v1r1.dtd" wctpToken="x226"><wctp-SubmitClientResponse><wctp-ClientSuccess successText="Message Accepted" successCode="200" trackingNumber="465357138"/></wctp-SubmitClientResponse></wctp-Operation>
5/10/2005 4:54:23 PM Invalid response from host
5/10/2005 4:54:23 PM Message retry limit reached
5/10/2005 4:54:23 PM FAILED To: MyUser Frm: MySendersName Msg:Test Message from Curt
5/10/2005 4:54:23 PM Carrier retry limit reached. Marking pending messages as bad


<Verizon description of what they expect>
From: http://wctp.myairmail.com/index.html

' <?xml version="1.0" encoding="UTF-8"?>
' <!DOCTYPE wctp-Operation
' SYSTEM "http://wctp.myairmail.com/wctp/wctp-dtd-v1r1.dtd">
' <wctp-Operation wctpVersion="wctp-dtd-v1r1">
' <wctp-SubmitRequest>
' <wctp-SubmitHeader submitTimestamp="2004-08-31T19:45:00">
' <wctp-Originator senderID="verizonCustomerLogin"
' securityCode="mySecretPassword"/>
' <wctp-MessageControl messageID="test00"/>
' <wctp-Recipient recipientID="8005551212"/>
' </wctp-SubmitHeader>
' <wctp-Payload>
' <wctp-Alphanumeric>Testing 123</wctp-Alphanumeric>
' </wctp-Payload>
' </wctp-SubmitRequest>
' </wctp-Operation>

Thank you in advance!

- Curt


Back to top
View user's profile
Display posts from previous:   
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> NotePager Pro Support All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group
Theme created by Vjacheslav Trushkin