NotePage, Inc. Forum Index

Cellular Modems and PageGate

 
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> General Questions and Announcements
View previous topic :: View next topic  
Author Message
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Mon Feb 27, 2017 2:13 pm    Post subject: Cellular Modems and PageGate Reply with quote

PageGate has built in support for cellular modems, allowing it to use them to send and receive SMS messages with the same method that a cell phone uses rather than relying on an internet connection.

To configure PageGate to use a serial or USB based cellular modem, such as the MTC-H5 or the MTBCA-G2, here's what you'll want to do:

Note: After installing the device in Windows, it will be assigned a COM port. Make a note of that COM port.

1) Open the PageGate Admin.

2) Go to Connectors - Connector X - Settings.
Note: Any connector can be configured to use a cellular modem. PageGate comes with 1 connector by default, so you'll likely configure Connector 1 to use the cellular modem but if you run multiple connectors, you can tie the cellular modem to any of them.

3) Set the "Serial Port" field to match the COM port of the modem.

4) Click on Apply.

5) Right click on Carriers, left click on Add.

6) Specify the following:
Name: SMS (This is arbitrary and can be set to whatever you like)
Protocol: GSM-AT
Baud Rate: 115200
Parity: None
Data Bits: 8
Stop Bits: 1
Init String: AT+CSQ (You'll need to type this in the field)

7) Click on Apply.

All that remains is to add a recipient to use the carrier and you can start using the cellular modem to deliver SMS messages.

Since a cellular modem delivers SMS in the same manner as a cell phone, if the recipient of your SMS replies to your message, that reply will come back to the cellular modem. Here's how to configure PageGate to periodically check the cellular modem for replies and send them to a predetermined recipient or group:

1) Open the PageGate Admin.

2) Go to Connectors - Connector X - 2-Way
Note: Go in to the settings of the connector you have the cellular modem tied to.

3) Check "Enable GSM-AT Replies"

4) Select a recipient or group from the drop down list.

5) Click on Apply.

From that point forward, any replies that come to the cellular modem will be delivered to the recipient or group specified.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
miloshandymangoldersgreen



Joined: 12 May 2017
Posts: 1
Location: Wood Green, NW11 7RN London

PostPosted: Fri May 12, 2017 7:31 am    Post subject: Reply with quote

wow.. thank you man !


Back to top
View user's profile Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> General Questions and Announcements All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group
Theme created by Vjacheslav Trushkin