NotePage, Inc. Forum Index

Pagegate v7 to Zetron 2100 Terminal via TAP

 
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> PageGate Support
View previous topic :: View next topic  
Author Message
lawco911



Joined: 07 Jul 2016
Posts: 9
Location: New Castle, pA

PostPosted: Thu Jul 07, 2016 8:57 am    Post subject: Pagegate v7 to Zetron 2100 Terminal via TAP Reply with quote

HI all:

We are trying to configure Pagegate (v7) to send out via serial to a Zetron 2100 terminal. We have successfully been able to communicate to the Zetron terminal via the zBase software.

However, when trying to send directly from pagegate, it doesn't work. I've included a log below. I've perused the forums and tried various serial settings to no avail--all I seem to get is a difference in the "reply" character in the log, but none of them appear to be what should be expected in the TAP protocol.

Connector settings:
init string (blank)
Dialing prefix (blank)
Serial Port (2)
Direct Connect checked

Carrier Settings
TAP
no phone #
300,e,7.1
Init string - auto
Max chars 240


-------------------
log:
7/7/2016 12:00:23 AM Module Started (v7.0.23)
7/7/2016 12:00:25 AM Time synchronized with scheduler
7/7/2016 9:50:12 AM ========================================
7/7/2016 9:50:12 AM Start connection to carrier: Zetron
7/7/2016 9:50:12 AM Connect using TAP protocol
7/7/2016 9:50:12 AM Setting communication parameters (300,e,7,1)
7/7/2016 9:50:12 AM Connected to carrier
7/7/2016 9:50:12 AM Waiting for protocol initialization
7/7/2016 9:50:12 AM Sent:<CR>
7/7/2016 9:50:14 AM Received:<127>
7/7/2016 9:50:14 AM Sent:<CR>
7/7/2016 9:50:17 AM Received:<127>
7/7/2016 9:50:17 AM Sent:<CR>
7/7/2016 9:50:21 AM Received:<127><127>
7/7/2016 9:50:21 AM Sent:<CR>
7/7/2016 9:50:27 AM Received:<127><127><127>
7/7/2016 9:50:32 AM ========================================
7/7/2016 9:50:32 AM Start connection to carrier: Zetron
7/7/2016 9:50:32 AM Connect using TAP protocol
7/7/2016 9:50:32 AM Setting communication parameters (300,e,7,1)
7/7/2016 9:50:32 AM Connected to carrier
7/7/2016 9:50:32 AM Waiting for protocol initialization
7/7/2016 9:50:32 AM Sent:<CR>
7/7/2016 9:50:34 AM Received:<127>
7/7/2016 9:50:34 AM Sent:<CR>


Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Thu Jul 07, 2016 9:07 am    Post subject: Reply with quote

Based on the response you're receiving, it looks like you may not have the cable plugged in to the TAP port on the Zetron terminal.

For example, from your log:
7/7/2016 9:50:12 AM Sent:<CR>
7/7/2016 9:50:14 AM Received:<127>

The response you're receiving is <127>, which is Ascii value 127, which translates as a "Delete" character or DEL statement.

The way the TAP protocol works is that the sending system sends a carriage return (recorded as <CR> in the logs) and is supposed to receive the text "ID=" from the receiving system.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
lawco911



Joined: 07 Jul 2016
Posts: 9
Location: New Castle, pA

PostPosted: Thu Jul 07, 2016 10:30 am    Post subject: Reply with quote

Thanks for the reply. If you see in my original email, we are able to successfully connect (from the same computer, perhaps I should have specified that) to the Zetron terminal using their software...so i dont think its a cabling issue.

Unless you are saying there are different ports? i will check that.



Thanks




Last edited by lawco911 on Thu Jul 07, 2016 10:31 am; edited 1 time in total
Back to top
View user's profile
lawco911



Joined: 07 Jul 2016
Posts: 9
Location: New Castle, pA

PostPosted: Thu Jul 07, 2016 10:30 am    Post subject: Reply with quote

unless there are different ports?


Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Thu Jul 07, 2016 10:34 am    Post subject: Reply with quote

When you were connecting to the terminal, what response did you see from the other end? Did you hit enter on your keyboard and receive an "ID=" ?



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
lawco911



Joined: 07 Jul 2016
Posts: 9
Location: New Castle, pA

PostPosted: Thu Jul 07, 2016 2:39 pm    Post subject: Reply with quote

(1) I looked, the only other RS-232 on the zetron is a printer port.

(2) When I connect through putty or a terminal, i also get a backspace. If i change some of the settings, i get different characters but none of them are <ID>...i've tried the CR too and nothing.


Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Thu Jul 07, 2016 3:00 pm    Post subject: Reply with quote

You may want to verify with Zetron that your model 2100 has a TAP port and, if it does, that the TAP port has been configured. It sounds like you're getting Zbase responses on the port at present.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
OzCom



Joined: 22 Oct 2003
Posts: 1121
Location: US

PostPosted: Fri Jul 08, 2016 9:22 am    Post subject: Reply with quote

Additionally, make sure you are using a NULL modem cable - NOT a typical Serial Cable



_________________
Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate
Back to top
View user's profile Send e-mail Visit poster's website AIM Address Yahoo Messenger MSN Messenger
lawco911



Joined: 07 Jul 2016
Posts: 9
Location: New Castle, pA

PostPosted: Mon Jul 11, 2016 8:03 am    Post subject: Reply with quote

Thank you--Just a question, if it was a cable issue, wouldnt it also prevent the Zbase software on the same computer from communicating properly? we found a county nearby who is using a similar setup and we're going to reach out to them as well.

BRM


Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Mon Jul 11, 2016 9:05 am    Post subject: Reply with quote

Not necessarily. Zbase has a routine/function that checks for the presence or absence of a null modem connection when directly connected and can alternate between the two as it detects. The TAP protocol, on the other hand, can only function via null modem cable when directly connected.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
lawco911



Joined: 07 Jul 2016
Posts: 9
Location: New Castle, pA

PostPosted: Tue Aug 02, 2016 9:25 am    Post subject: Reply with quote

As an update, We were able to resolve it...it turns out the technician only had the connection setup for zBaseW, not the multiport serial adapter for TAP...we added the second RS-232, had zetron set up the terminal, added a null modem connection and configured it and it appears to work fine. Now i'm having a different issue that i'll post as a new thread.

Thanks for all of your help.


Back to top
View user's profile
Display posts from previous:   
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> PageGate Support All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group
Theme created by Vjacheslav Trushkin