NotePage, Inc. Forum Index

Program Halted. Database error: 3219 Invalid op. SendGSM

 
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> PageGate Support
View previous topic :: View next topic  
Author Message
ShadyB



Joined: 10 Jan 2017
Posts: 1
Location: South Africa

PostPosted: Tue Jan 10, 2017 2:55 am    Post subject: Program Halted. Database error: 3219 Invalid op. SendGSM Reply with quote

Upon installing page gate ver 5.0, I came across the error: Program Halted. Database error: 3219 Invalid operation. SendGSM

The port on connector 1 is the same as in the Modem
PG Monitor shows GetMail,GetSerial,GetTap,GetWeb all in red

Please advice


Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Wed Jan 11, 2017 3:30 pm    Post subject: Reply with quote

The 3219 error in relation to the SendGSM process indicates that PageGate can't open the port that the connector has been configured to use. So, if you go to the Connectors - Connector 1 - Settings section, there's a "serial port" field that will need to match the COM port of the modem.

If the modem is on the COM port specified, I'd recommend doing a basic diagnostic on the device:

1) Open the PG Admin.

2) Right click on Connectors, left click on Stop All.

3) Run Putty, Hyperterminal, VBTerm or similar.

4) Connect to the COM port of the cellular modem at 115200 baud, no parity, 8 data bits and 1 stop bit.

If you're unable to connect, that indicates that the modem is unresponsive and that you may have a hardware problem.

5) If you can connect to the device, type the following and hit enter after each command to try to send yourself a text message:
AT
AT+CSQ
AT+CMGF=1
AT+CMGS="10digitCellPhoneNumber"
The body of a test message. <CTRL+Z>

If you receive any errors in response to these AT commands, that indicates that you may have a hardware problem.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Wed Jan 11, 2017 3:31 pm    Post subject: Reply with quote

Just to note, once you finish the test, you'll want to go back in to the PG Admin, right click on Connectors and left click on Start All to bring the connectors online.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
Display posts from previous:   
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> PageGate Support All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group
Theme created by Vjacheslav Trushkin