| View previous topic :: View next topic |
| Author |
Message |
Tazuki
Joined: 17 Jun 2014
Posts: 5
|
 Posted: Tue Jun 17, 2014 9:23 am Post subject: Send SMS from PageGate |
 |
|
When i try to send a sms with PageGate. I get no sms :( in my Phone.
I try to send a sms from the Recepient and i see that the sms is pending.
So i have setup a carrier that have connection with a serial modem that use 3G to send SMS. In the Receptient i have selected the carrier and i have put the phonenumber in the ID/PIN.
The connector is also installed with the carrier and set on com1 with a direct connect.
Do i miss something? It seems that after the pending nothing happen.
All this was working (but after crash i needed to reinstall it)
|
|
| Back to top |
|
Tech Support
Joined: 25 Aug 2003
Posts: 4382
|
| Posted: Tue Jun 17, 2014 9:28 am Post subject: |
|
|
| When you run the PageGate Monitor on the server, what items (if any) show up as green in the main monitor window (the one with the good and bad columns) ? |
|
| Back to top |
|
OzCom
Joined: 22 Oct 2003
Posts: 1122
Location: US
|
| Posted: Tue Jun 17, 2014 9:49 am Post subject: |
|
|
You wrote: "The connector is also installed with the carrier and set on com1 with a direct connect"
DO NOT check "direct Connect" in the connector_________________ Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate |
|
| Back to top |
|
Tazuki
Joined: 17 Jun 2014
Posts: 5
|
| Posted: Wed Jun 18, 2014 1:33 am Post subject: |
|
|
[quote="Tech Support"]When you run the PageGate Monitor on the server, what items (if any) show up as green in the main monitor window (the one with the good and bad columns) ?[/quote]
The following is showing up in green:
Server
ASCII
Connector
And when i send a test email from PRTG then i see 1 good in GetAscii
|
|
| Back to top |
|
Tazuki
Joined: 17 Jun 2014
Posts: 5
|
| Posted: Wed Jun 18, 2014 1:34 am Post subject: |
|
|
[quote="OzCom"]You wrote: "The connector is also installed with the carrier and set on com1 with a direct connect"
DO NOT check "direct Connect" in the connector[/quote]
OK but the manual say that you need to when you connect a serial modem directly with the pc. where also the PageGate software is on it.
|
|
| Back to top |
|
Tech Support
Joined: 25 Aug 2003
Posts: 4382
|
| Posted: Wed Jun 18, 2014 8:07 am Post subject: |
|
|
| Quote: |
| OK but the manual say that you need to when you connect a serial modem directly with the pc. where also the PageGate software is on it. |
That's not quite right. You only want to check Direct Connect if you're using a direct serial connection to a paging terminal, like a Zetron or a Glenayre TAP terminal. If you're using a modem (whether it's dial-up or cellular), Direct Connect should never be checked. |
|
| Back to top |
|
Tech Support
Joined: 25 Aug 2003
Posts: 4382
|
| Posted: Wed Jun 18, 2014 8:08 am Post subject: |
|
|
| Tazuki wrote: |
The following is showing up in green:
Server
ASCII
Connector
And when i send a test email from PRTG then i see 1 good in GetAscii |
So, Sched is in Red? If that's the case, open the PageGate Admin and go to the Program - Settings section. Is Scheduler checked? |
|
| Back to top |
|
Tazuki
Joined: 17 Jun 2014
Posts: 5
|
| Posted: Thu Jun 19, 2014 1:23 am Post subject: |
|
|
| Tech Support wrote: |
| Tazuki wrote: |
The following is showing up in green:
Server
ASCII
Connector
And when i send a test email from PRTG then i see 1 good in GetAscii |
So, Sched is in Red? If that's the case, open the PageGate Admin and go to the Program - Settings section. Is Scheduler checked? |
There was the problem. No sched :(
After i activate it, the messages was going to my cell. Thanks for the support.
|
|
| Back to top |
|
|
