NotePage, Inc. Forum Index

Invalid response from host

 
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> PageGate Support
View previous topic :: View next topic  
Author Message
kent



Joined: 07 Sep 2005
Posts: 44

PostPosted: Thu May 02, 2013 3:07 pm    Post subject: Invalid response from host Reply with quote

Hello,
I am a Verizon EMAG customer and recently started receiving "Invalid response from host" on all the secure WCTP messages. It will eventually fail over to our backup using unsecured WCTP which works fine.

My settings for WCTP secure which no longer work are:
https://enterprisemessaging.vzw.com/wctp/wctp

I used Google Chrome and a RESP extension to manually submit the message using WCTP secure, this should mimic what PageGate is doing but that works fine and I get a valid response.

Is there any way to see exactly what PageGate is seeing other than invalid response? Here is an excerpt from the log.



5/2/2013 3:52:00 PM ========================================
5/2/2013 3:52:00 PM Start connection to carrier: VERIZON-EMAG
5/2/2013 3:52:00 PM Send using WCTP protocol
5/2/2013 3:52:00 PM ----------------------------------------
5/2/2013 3:52:00 PM Working on message to: wkwicker from: kent
5/2/2013 3:52:00 PM Formatting message
5/2/2013 3:52:00 PM Message contained in single packet
5/2/2013 3:52:00 PM Sending message to https://enterprisemessaging.vzw.com:443/wctp/wctp
5/2/2013 3:52:00 PM Sent:
5/2/2013 3:52:00 PM <?xml version="1.0"?>
5/2/2013 3:52:00 PM <!DOCTYPE wctp-Operation SYSTEM "http://dtd.wctp.org/wctp-dtd-v1r1.dtd">
5/2/2013 3:52:00 PM <wctp-Operation wctpVersion="wctp-dtd-v1r1">
5/2/2013 3:52:00 PM <wctp-SubmitRequest>
5/2/2013 3:52:00 PM <wctp-SubmitHeader submitTimestamp="2013-05-02T19:52:00">
5/2/2013 3:52:00 PM <wctp-Originator senderID="*******" securityCode="********" />
5/2/2013 3:52:00 PM <wctp-MessageControl messageID="2608074" preformatted="true" />
5/2/2013 3:52:00 PM <wctp-Recipient recipientID="843xxxxxxx" />
5/2/2013 3:52:00 PM </wctp-SubmitHeader>
5/2/2013 3:52:00 PM <wctp-Payload>
5/2/2013 3:52:00 PM <wctp-Alphanumeric>1387:kent:message7</wctp-Alphanumeric>
5/2/2013 3:52:00 PM </wctp-Payload>
5/2/2013 3:52:00 PM </wctp-SubmitRequest>
5/2/2013 3:52:00 PM </wctp-Operation>
5/2/2013 3:52:01 PM Received:
5/2/2013 3:52:01 PM Invalid response from host
5/2/2013 3:52:01 PM Failover: message redirected to VERIZON-EMAG-BK1 carrier.
5/2/2013 3:52:01 PM Carrier retry limit reached. Redirecting messages to VERIZON-EMAG-BK1
5/2/2013 3:52:13 PM ========================================


Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Thu May 02, 2013 3:31 pm    Post subject: Reply with quote

If you would, go in to the properties of the pagegate.exe in the PageGate program directory and let me know what File Version it says you're using.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
kent



Joined: 07 Sep 2005
Posts: 44

PostPosted: Fri May 03, 2013 7:49 am    Post subject: Reply with quote

I am using 5.0.0.95.


Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Fri May 03, 2013 8:41 am    Post subject: Reply with quote

If you would, please email your contact information to support at notepage dot com

There are a few tests I'd like to run but due to the sensitive nature of the secure host you're using and the logs potentially containing your credentials, it's probably better to do this via email rather than a public forum.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
cbenz80



Joined: 22 Jun 2013
Posts: 1
Location: Atlanta, Ga

PostPosted: Sat Jun 22, 2013 11:30 am    Post subject: Reply with quote

I am seeing the same error when integrating to Verizon SNPP due to the password limitations on NotePager Pro. Verizon SNPP integration requires a Username (6 characters) & Password (min 15 characters). On at least one version of NotePager Pro, it appears that the max password length is 10 characters & that there is no Username field. I have not found a resolution to this issue to date...

Chris Bennett,
Advanced Solutions Architect,
Verizon Wireless

**As a Verizon Wireless employee, all opinions expressed are my own & do not reflect that of Verizon Wireless**


Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Tue Jun 25, 2013 8:51 am    Post subject: Reply with quote

This thread was originally created for PageGate, which handles things a bit differently than NotePager Pro does.

To address the post related to NotePager Pro, however, the current build of NotePager Pro, 3.0.0.10, can handle up to 40 characters in the password field. For most SNPP hosts, you'll want to use the username and password separated by a space in the password field. The reason for this is that the authentication in SNPP is done via the LOGI command and the LOGI command pulls its information out of the password field. Now, I'm not sure if Verizon also verifies based on the Sender's name or if the Sender's name needs to match the Username but if it does, you can always go to Tools - Settings - General and set the Sender's Name value to the username.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
Display posts from previous:   
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> PageGate Support All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group
Theme created by Vjacheslav Trushkin