View previous topic :: View next topic |
Author |
Message |
OzCom
Joined: 22 Oct 2003 Posts: 1122 Location: US
|
Posted: Wed Apr 24, 2013 8:22 am Post subject: |
|
|
It MAY be something as simple as a permission issue on your network - you said your test system worked fine. Does the current system use the same account/permissions? Was the Virtual COM port drive installed while logged as the local system administrator (not a user with ADMIN rights, but the actual built in local system administrator account)?_________________ Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate |
|
Back to top |
|
stefanIT
Joined: 18 Apr 2013 Posts: 21
|
Posted: Wed Apr 24, 2013 8:27 am Post subject: |
|
|
Yes, same permissions, same account used, same OU/GPOs, same IP range and domain. No, I was only logged on with my own admin account (which is a member of local Administrators). I will try the following:
1) Remove the VSP from my test VM
2) Reboot the MTCBA
3) Add the VSP once the MTCBA has finished booting.
4) Log on as local Admin and try another PuTTY session to COM1.
|
|
Back to top |
|
stefanIT
Joined: 18 Apr 2013 Posts: 21
|
Posted: Wed Apr 24, 2013 8:50 am Post subject: |
|
|
No dice: COM port hung again.
|
|
Back to top |
|
OzCom
Joined: 22 Oct 2003 Posts: 1122 Location: US
|
Posted: Wed Apr 24, 2013 8:56 am Post subject: |
|
|
You wrote:
1) Remove the VSP from my test VM
2) Reboot the MTCBA
3) Add the VSP once the MTCBA has finished booting.
4) Log on as local Admin and try another PuTTY session to COM1.
I suggest:
1) Log in as LOCAL ADMIN
1) Remove the VSP from my test VM
2) Reboot the MTCBA
3) Add the VSP once the MTCBA has finished booting.
4) Try another PuTTY session to COM1._________________ Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate |
|
Back to top |
|
stefanIT
Joined: 18 Apr 2013 Posts: 21
|
Posted: Wed Apr 24, 2013 8:58 am Post subject: |
|
|
Sorry - can't remove the VSP whilst the VM is running. Do you know what the settings on the MTCBA should be? Is there something I haven't configured since I did a reset yesterday (see previous comment)?
|
|
Back to top |
|
stefanIT
Joined: 18 Apr 2013 Posts: 21
|
Posted: Wed Apr 24, 2013 9:49 am Post subject: |
|
|
Update: I can communicate with the MTCBA from PageGate over the VSP if "autodialout login" is enabled, but then it just keeps displaying the following:
24/04/2013 15:45:56 Setting communication parameters (115200,n,8,1)
24/04/2013 15:45:56 Attempting to reset modem
24/04/2013 15:45:56 Sent:AT<CR>
24/04/2013 15:45:59 Received:AT<CR><LF>Password:
24/04/2013 15:45:59 Attempting to reset modem
24/04/2013 15:45:59 Sent:AT<CR>
24/04/2013 15:46:02 Received:<CR><CR><LF>Invalid Login name (AT)<CR><CR><LF>Login:
24/04/2013 15:46:02 Attempting to reset modem
24/04/2013 15:46:02 Sent:AT<CR>
24/04/2013 15:46:05 Received:AT<CR><LF>Password:
24/04/2013 15:46:05 Attempting to hang up modem
How can I get around that?
|
|
Back to top |
|
OzCom
Joined: 22 Oct 2003 Posts: 1122 Location: US
|
Posted: Wed Apr 24, 2013 10:04 am Post subject: |
|
|
Well - that particular model device has been discontinued by MultiTech - BUT - you may have luck with this:
http://com0com.sourceforge.net/_________________ Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate |
|
Back to top |
|
OzCom
Joined: 22 Oct 2003 Posts: 1122 Location: US
|
Posted: Wed Apr 24, 2013 10:05 am Post subject: |
|
|
A commercial solution can be found here as well
http://www.tacticalsoftware.com/_________________ Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate |
|
Back to top |
|
stefanIT
Joined: 18 Apr 2013 Posts: 21
|
Posted: Wed Apr 24, 2013 10:12 am Post subject: |
|
|
I have spent 100+ man hours and used three different gateways trying to get this to work. To say I'm gutted is an understatement. It seems I am the first person in history to try to set up in-house SMS alerting from a VM.
|
|
Back to top |
|
OzCom
Joined: 22 Oct 2003 Posts: 1122 Location: US
|
Posted: Wed Apr 24, 2013 10:16 am Post subject: |
|
|
I have many installations performing alerting with MultiTech modems and PageGate on VM - just not that model modem._________________ Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate |
|
Back to top |
|
stefanIT
Joined: 18 Apr 2013 Posts: 21
|
|
Back to top |
|
OzCom
Joined: 22 Oct 2003 Posts: 1122 Location: US
|
Posted: Wed Apr 24, 2013 10:28 am Post subject: |
|
|
This is the specific model I would have recommended (for European, GB, or Ireland):
MTCBA-G2-ED-EU or MTCBA-G2-ED-GB/IE
For US installation:
MTCBA-G2-NAM_________________ Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate |
|
Back to top |
|
stefanIT
Joined: 18 Apr 2013 Posts: 21
|
Posted: Thu Apr 25, 2013 2:55 am Post subject: |
|
|
Could you (or someone) please post a list of configurations required on a working MTCBA model so I can at least compare it to what I've configured?
|
|
Back to top |
|
OzCom
Joined: 22 Oct 2003 Posts: 1122 Location: US
|
Posted: Thu Apr 25, 2013 7:52 am Post subject: |
|
|
CARRIER (SMS_Modem):
Protocol: GSM-AT
Baud Rate: 115200
Parity: None
Data Bits: 8
Stop Bits: 1
Init String: AT+CSQ
Max Chars: 160
CONNECTOR(1)
Init String: blank
Dialing Prefix: blank
Dedicated Carrier: SMS_Modem
Serial Port: 2 (in my example)
Direct Connect: NOT checked
The MultiTech MTCBA device is factory default - this particular example is a GSM USB variant subscribed to T-Mobile_________________ Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate |
|
Back to top |
|
stefanIT
Joined: 18 Apr 2013 Posts: 21
|
Posted: Thu Apr 25, 2013 8:54 am Post subject: |
|
|
Thanks. This started working as soon as I ditched the VMware VSP in favour of a 3rd party one.
|
|
Back to top |
|
|