NotePage, Inc. Forum Index

Using PageGate with Intergraph CAD I/Page Module

 
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> Integration Related Questions
View previous topic :: View next topic  
Author Message
Dan@MetroSafe



Joined: 07 Oct 2011
Posts: 7
Location: Louisville, KY

PostPosted: Mon Apr 09, 2012 10:07 am    Post subject: Using PageGate with Intergraph CAD I/Page Module Reply with quote

Has anyone used PageGate with Intergraph CAD's I/Page Module. We are interested in using them together to send messages to Fire Units when they are dispatched. Just curious if you have got them working together, how does it work, ups, downs etc!!

Thanks for any information.



_________________
Thanks,
Dan

EMA/MetroSafe
Back to top
View user's profile Send e-mail Visit poster's website
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Mon Apr 09, 2012 10:42 am    Post subject: Reply with quote

Dan,

We do have clients integrating Intergraph's CAD system with PageGate. In the other configurations, this is done with the GetTAP module. The CAD system connects to the PageGate PC by direct serial cable and PageGate's GetTAP module monitors that serial port for incoming TAP sessions. Once it receives them, it translates them in to outbound messages to the recipient, recipients, group or groups referenced by the CAD.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
Dan@MetroSafe



Joined: 07 Oct 2011
Posts: 7
Location: Louisville, KY

PostPosted: Mon Apr 09, 2012 10:53 am    Post subject: Reply with quote

That is great! I am very interested in getting this up and running here. I have read through some of the documentation but this is going into areas that I'm not familiar with. Is this something I can contact Support for?



_________________
Thanks,
Dan

EMA/MetroSafe
Back to top
View user's profile Send e-mail Visit poster's website
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Mon Apr 09, 2012 10:57 am    Post subject: Reply with quote

Sure, just email your contact information to support at notepage dot com and we'll help however we can.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
OzCom



Joined: 22 Oct 2003
Posts: 1121
Location: US

PostPosted: Tue Apr 10, 2012 8:58 am    Post subject: Reply with quote

Dan - is this going onto SVAPPS 24 or SVAPPS 25?

Also: The getTAP module is an option ($200.00) and you'll need a NULL modem serial cable for direct connect.

Alternatively, an analog modem and phone line. Intergraph will dial this modem's extension and THINK it is talking with a Paging Terminal.

Direct connect is MUCH faster since there is no need to go through the call set up / tear down routine



_________________
Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate
Back to top
View user's profile Send e-mail Visit poster's website AIM Address Yahoo Messenger MSN Messenger
Dan@MetroSafe



Joined: 07 Oct 2011
Posts: 7
Location: Louisville, KY

PostPosted: Tue Apr 10, 2012 1:27 pm    Post subject: Reply with quote

This will be connecting to SVAPPS24 and I've already got the GetTAP module. According to the I/Page instructions it can use TAP or SNPP2 to send the information to the server, I'm still looking at that to see what I can do and what I will need.



_________________
Thanks,
Dan

EMA/MetroSafe
Back to top
View user's profile Send e-mail Visit poster's website
OzCom



Joined: 22 Oct 2003
Posts: 1121
Location: US

PostPosted: Tue Apr 10, 2012 1:37 pm    Post subject: Reply with quote

Cool

SNPP means you do not need the cable or modem - BUT - you do need the optional SNPPServer module.

Let me know when you want to configure the getTAP for testing



_________________
Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate
Back to top
View user's profile Send e-mail Visit poster's website AIM Address Yahoo Messenger MSN Messenger
Dan@MetroSafe



Joined: 07 Oct 2011
Posts: 7
Location: Louisville, KY

PostPosted: Tue Apr 10, 2012 1:46 pm    Post subject: Reply with quote

Awesome, let me get with the CAD folks tomorrow and see where they stand with the test install and I will get back with you. Not sure how soon it will be we are coming up on the Kentucky Derby events here and we have a lot of stuff to prepare for that, I will let you know off line.



_________________
Thanks,
Dan

EMA/MetroSafe
Back to top
View user's profile Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> Integration Related Questions All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group
Theme created by Vjacheslav Trushkin