View previous topic :: View next topic |
Author |
Message |
lsbk
Joined: 22 Jun 2007 Posts: 5
|
Posted: Fri Jun 22, 2007 9:43 am Post subject: SMS through a Ethernet based SMS modem |
|
|
Hi,
I have an Ethernet based SMS modem from Multitech and I would like to send SMS messages from a computer.
I would like to configure the modem with an IP address on the Ethernet Interface and connect to this IP address to send SMS messages.
Any suggestions how this could be implemented?
Regards,
Laurean
|
|
Back to top |
|
Tech Support
Joined: 25 Aug 2003 Posts: 4355
|
Posted: Fri Jun 22, 2007 1:21 pm Post subject: |
|
|
My first instinct would be to say that the program couldn't interface with the device... but I don't know enough about Ethernet based modems to speak authoritatively.
I can, however, say that so long as the modem has COM port on the computer running the PageGate Server, PageGate can use it. If the modem has no COM port, PageGate isn't going to be able to use it. |
|
Back to top |
|
OzCom
Joined: 22 Oct 2003 Posts: 1121 Location: US
|
Posted: Fri Jun 22, 2007 3:48 pm Post subject: |
|
|
I have used the MultiTech line (FULL DISCLOSURE: We are MultiTech resellers) - As tech support noted - all you need to do is to assign a COM port to the modem. Then set up a new carrier in PageGate using the GSM protocol and pointed to that port_________________ Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate |
|
Back to top |
|
lsbk
Joined: 22 Jun 2007 Posts: 5
|
Posted: Fri Jun 22, 2007 5:59 pm Post subject: |
|
|
How do I assing a COM port to an Ethernet based modem?
Thanks,
Laurean
|
|
Back to top |
|
OzCom
Joined: 22 Oct 2003 Posts: 1121 Location: US
|
Posted: Fri Jun 22, 2007 6:49 pm Post subject: |
|
|
Which MultiTech product ID are you using? Feel free to send me the model number and serial number off list and I'll reply with detailed instructions_________________ Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate |
|
Back to top |
|
lsbk
Joined: 22 Jun 2007 Posts: 5
|
Posted: Sat Jun 23, 2007 10:04 am Post subject: |
|
|
The model that I have is MTCBA-G-EN 850/1900 MHz GPRS Modem
Thanks
Laurean Stefenel
|
|
Back to top |
|
lsbk
Joined: 22 Jun 2007 Posts: 5
|
Posted: Wed Jun 27, 2007 10:18 am Post subject: |
|
|
Hi Aaron,
Have you been able to find anything on this modem?
Thanks,
Laurean
|
|
Back to top |
|
lsbk
Joined: 22 Jun 2007 Posts: 5
|
Posted: Thu Jun 28, 2007 3:27 pm Post subject: |
|
|
Since I don't have a solution for my Ethernet based modem I was looking into SNPP.
Are there any providers that could be used for testing?
If I am sending SMS messages using SNPP through a carrier, can I send SMS messages to a phone which is not connected to the provider that I am using?
Thanks,
Laurean
|
|
Back to top |
|
OzCom
Joined: 22 Oct 2003 Posts: 1121 Location: US
|
|
Back to top |
|
jjgarsal
Joined: 13 May 2008 Posts: 1
|
Posted: Tue May 13, 2008 3:13 pm Post subject: Can you solve your problem? I need your help! |
|
|
I have a MTCBA-E-EN Multimodem EDGE and I need to do an application to send messages, I am using linux.
Can you help me? or do you have a link where I can found information ?
Thanks
lsbk wrote: |
Since I don't have a solution for my Ethernet based modem I was looking into SNPP.
Are there any providers that could be used for testing?
If I am sending SMS messages using SNPP through a carrier, can I send SMS messages to a phone which is not connected to the provider that I am using?
Thanks,
Laurean |
|
|
Back to top |
|
|