Set up for American Messaging

[mediapage]

I have set up Note Pager Pro for SNPP
Set up carrier as American Messaging w/ snpp.americanmessaging.net
set up user with the number I use (xxxxxxxxxx) in my other paging prog

I send a message and it just stays in the pending with not indication that it tried to go out. I am on an always-on DSL line. HELP!

[Tech Support]

That sounds like the dialer engine portion of the program isn't properly registered with Windows or something of that nature. Give this a try, if you would:

1) Using the Windows explorer, browse to the c:\program files\notepager pro\ directory.

2) In that directory, you should see a NPP.mdb file. If you have system set NOT to show you the extentions to file types, you'll see a file that is named NPP and the icon of the file will be a small, yellow key.

2a) If you want to view the extentions to files, which I highly recommend, you'll want to go to Tools -> Folder Options.

2b) In the Folder Options, go under the View Tab.

2c) UNCHECK "Hide extensions for known file types" and click on OK.

3) Make a copy of this file somewhere on your computer, preferrably to your My Documents folder or the root c:\

4) After you've made a copy of the database, uninstall NotePager Pro.

5) During the installation, it will prompt you if you want to remove all files, tell it yes.

6) Reboot the computer.

7) Once the computer comes back up, you'll want to visit our website: http://www.notepage.net

8) Click on the Download button under the NotePager Pro section.

9) After the file has been downloaded, run it.

10) This will take you through the installation for the latest version of NotePager Pro, including any patches we've released since you originally installed the program.

11) After you install the latest version of NotePager Pro, run the program once. Skip or cancel all of the wizards it prompt you to, then close the program.

12) After you've closed the program, go back to your Windows Explorer.

13) Find the copy of the NPP.mdb file that you made, whether you put it in your root c:\ or My Documents folder.

14) Copy this file directly into the c:\program files\notepager pro\ directory. It will ask you if you want to overwrite the file, say yes.

15) Once you do that, run NotePager Pro again. Everything should be restored and fully functional.

[mediapage]

I did just as you said and it STILL does not send. I have run the connection wizzard and all is fine there.

[mediapage]

I just went into the error log and it shows an "Error 3075" each and every time.

[Tech Support]

Wait... 3075 error? Can you give me the details on the error?

[mediapage]

5/15/2008 14:35:02 HOURS Dialer Started
5/15/2008 14:35:03 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:35:07 HOURS Dialer Started
5/15/2008 14:35:08 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:35:13 HOURS Dialer Started
5/15/2008 14:35:14 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:35:27 HOURS Dialer Started
5/15/2008 14:35:28 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:35:33 HOURS Dialer Started
5/15/2008 14:35:34 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:35:38 HOURS Dialer Started
5/15/2008 14:35:39 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:35:43 HOURS Dialer Started
5/15/2008 14:35:45 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:35:49 HOURS Dialer Started
5/15/2008 14:35:50 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:35:57 HOURS Dialer Started
5/15/2008 14:35:58 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:36:03 HOURS Dialer Started
5/15/2008 14:36:04 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:36:08 HOURS Dialer Started
5/15/2008 14:36:09 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:36:14 HOURS Dialer Started
5/15/2008 14:36:15 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:36:19 HOURS Dialer Started
5/15/2008 14:36:20 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:36:26 HOURS Dialer Started
5/15/2008 14:36:27 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:36:31 HOURS Dialer Started
5/15/2008 14:36:32 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:36:37 HOURS Dialer Started
5/15/2008 14:36:38 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:36:42 HOURS Dialer Started
5/15/2008 14:36:44 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:36:48 HOURS Dialer Started
5/15/2008 14:36:49 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:36:53 HOURS Dialer Started
5/15/2008 14:36:55 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:36:59 HOURS Dialer Started
5/15/2008 14:37:00 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:37:06 HOURS Dialer Started
5/15/2008 14:37:07 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:37:11 HOURS Dialer Started
5/15/2008 14:37:12 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:37:16 HOURS Dialer Started
5/15/2008 14:37:18 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:37:22 HOURS Dialer Started
5/15/2008 14:37:23 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:37:28 HOURS Dialer Started
5/15/2008 14:37:29 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:37:33 HOURS Dialer Started
5/15/2008 14:37:34 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:37:39 HOURS Dialer Started
5/15/2008 14:37:40 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:37:45 HOURS Dialer Started
5/15/2008 14:37:46 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:37:50 HOURS Dialer Started
5/15/2008 14:37:51 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:37:56 HOURS Dialer Started
5/15/2008 14:37:57 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:38:01 HOURS Dialer Started
5/15/2008 14:38:03 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:38:07 HOURS Dialer Started
5/15/2008 14:38:08 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:38:12 HOURS Dialer Started
5/15/2008 14:38:13 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:38:18 HOURS Dialer Started
5/15/2008 14:38:19 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:38:23 HOURS Dialer Started
5/15/2008 14:38:24 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:38:28 HOURS Dialer Started
5/15/2008 14:38:29 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:38:34 HOURS Dialer Started
5/15/2008 14:38:35 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:38:39 HOURS Dialer Started
5/15/2008 14:38:40 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:38:44 HOURS Dialer Started
5/15/2008 14:38:46 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:38:50 HOURS Dialer Started
5/15/2008 14:38:51 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:38:55 HOURS Dialer Started
5/15/2008 14:38:57 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:39:01 HOURS Dialer Started
5/15/2008 14:39:02 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:39:06 HOURS Dialer Started
5/15/2008 14:39:07 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:39:12 HOURS Dialer Started
5/15/2008 14:39:13 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:39:17 HOURS Dialer Started
5/15/2008 14:39:18 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:39:22 HOURS Dialer Started
5/15/2008 14:39:23 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:39:28 HOURS Dialer Started
5/15/2008 14:39:29 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:39:33 HOURS Dialer Started
5/15/2008 14:39:34 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:39:38 HOURS Dialer Started
5/15/2008 14:39:40 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:39:44 HOURS Dialer Started
5/15/2008 14:39:45 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:39:49 HOURS Dialer Started
5/15/2008 14:39:50 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:39:55 HOURS Dialer Started
5/15/2008 14:39:56 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:40:00 HOURS Dialer Started
5/15/2008 14:40:01 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:40:05 HOURS Dialer Started
5/15/2008 14:40:06 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:40:11 HOURS Dialer Started
5/15/2008 14:40:12 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:40:16 HOURS Dialer Started
5/15/2008 14:40:17 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:40:22 HOURS Dialer Started
5/15/2008 14:40:23 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:40:27 HOURS Dialer Started
5/15/2008 14:40:28 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:40:32 HOURS Dialer Started
5/15/2008 14:40:33 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:40:38 HOURS Dialer Started
5/15/2008 14:40:39 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:40:43 HOURS Dialer Started
5/15/2008 14:40:44 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:40:48 HOURS Dialer Started
5/15/2008 14:40:49 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:40:54 HOURS Dialer Started
5/15/2008 14:40:55 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:40:59 HOURS Dialer Started
5/15/2008 14:41:00 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:41:04 HOURS Dialer Started
5/15/2008 14:41:06 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:41:10 HOURS Dialer Started
5/15/2008 14:41:11 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:41:15 HOURS Dialer Started
5/15/2008 14:41:17 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:41:21 HOURS Dialer Started
5/15/2008 14:41:22 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:41:27 HOURS Dialer Started
5/15/2008 14:41:28 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:41:32 HOURS Dialer Started
5/15/2008 14:41:33 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:41:37 HOURS Dialer Started
5/15/2008 14:41:38 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:41:43 HOURS Dialer Started
5/15/2008 14:41:44 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:41:49 HOURS Dialer Started
5/15/2008 14:41:50 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:41:55 HOURS Dialer Started
5/15/2008 14:41:56 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:42:00 HOURS Dialer Started
5/15/2008 14:42:01 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:42:05 HOURS Dialer Started
5/15/2008 14:42:07 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:42:11 HOURS Dialer Started
5/15/2008 14:42:12 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:42:16 HOURS Dialer Started
5/15/2008 14:42:17 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:42:22 HOURS Dialer Started
5/15/2008 14:42:23 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:42:27 HOURS Dialer Started
5/15/2008 14:42:28 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:42:33 HOURS Dialer Started
5/15/2008 14:42:34 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:42:38 HOURS Dialer Started
5/15/2008 14:42:39 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:42:44 HOURS Dialer Started
5/15/2008 14:42:45 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:42:49 HOURS Dialer Started
5/15/2008 14:42:50 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:42:54 HOURS Dialer Started
5/15/2008 14:42:56 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:43:00 HOURS Dialer Started
5/15/2008 14:43:01 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:43:05 HOURS Dialer Started
5/15/2008 14:43:06 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:43:10 HOURS Dialer Started
5/15/2008 14:43:12 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:43:16 HOURS Dialer Started
5/15/2008 14:43:17 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:43:21 HOURS Dialer Started
5/15/2008 14:43:22 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:43:27 HOURS Dialer Started
5/15/2008 14:43:28 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:43:32 HOURS Dialer Started
5/15/2008 14:43:33 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:43:37 HOURS Dialer Started
5/15/2008 14:43:38 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:43:43 HOURS Dialer Started
5/15/2008 14:43:44 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:43:48 HOURS Dialer Started
5/15/2008 14:43:49 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:43:54 HOURS Dialer Started
5/15/2008 14:43:55 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:43:59 HOURS Dialer Started
5/15/2008 14:44:00 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:44:04 HOURS Dialer Started
5/15/2008 14:44:05 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:44:10 HOURS Dialer Started
5/15/2008 14:44:11 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:44:15 HOURS Dialer Started
5/15/2008 14:44:16 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:44:20 HOURS Dialer Started
5/15/2008 14:44:22 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:44:26 HOURS Dialer Started
5/15/2008 14:44:27 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:44:31 HOURS Dialer Started
5/15/2008 14:44:32 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:44:37 HOURS Dialer Started
5/15/2008 14:44:38 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:44:42 HOURS Dialer Started
5/15/2008 14:44:43 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:44:47 HOURS Dialer Started
5/15/2008 14:44:48 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:44:53 HOURS Dialer Started
5/15/2008 14:44:54 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:44:58 HOURS Dialer Started
5/15/2008 14:44:59 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:45:03 HOURS Dialer Started
5/15/2008 14:45:05 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:45:09 HOURS Dialer Started
5/15/2008 14:45:10 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:45:14 HOURS Dialer Started
5/15/2008 14:45:15 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:45:23 HOURS Dialer Started
5/15/2008 14:45:24 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:45:28 HOURS Dialer Started
5/15/2008 14:45:29 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:45:33 HOURS Dialer Started
5/15/2008 14:45:34 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:45:39 HOURS Dialer Started
5/15/2008 14:45:40 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:45:44 HOURS Dialer Started
5/15/2008 14:45:45 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:45:50 HOURS Dialer Started
5/15/2008 14:45:51 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:45:55 HOURS Dialer Started
5/15/2008 14:45:56 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:46:00 HOURS Dialer Started
5/15/2008 14:46:01 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:46:26 HOURS Dialer Started
5/15/2008 14:46:27 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:46:31 HOURS Dialer Started
5/15/2008 14:46:32 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:46:36 HOURS Dialer Started
5/15/2008 14:46:38 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:46:42 HOURS Dialer Started
5/15/2008 14:46:43 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:46:47 HOURS Dialer Started
5/15/2008 14:46:48 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:46:53 HOURS Dialer Started
5/15/2008 14:46:54 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:46:58 HOURS Dialer Started
5/15/2008 14:46:59 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:47:03 HOURS Dialer Started
5/15/2008 14:47:04 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:47:09 HOURS Dialer Started
5/15/2008 14:47:10 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:47:15 HOURS Dialer Started
5/15/2008 14:47:16 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:47:20 HOURS Dialer Started
5/15/2008 14:47:21 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:47:26 HOURS Dialer Started
5/15/2008 14:47:27 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:47:31 HOURS Dialer Started
5/15/2008 14:47:32 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:47:36 HOURS Dialer Started
5/15/2008 14:47:38 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:47:42 HOURS Dialer Started
5/15/2008 14:47:43 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:47:47 HOURS Dialer Started
5/15/2008 14:47:48 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:47:53 HOURS Dialer Started
5/15/2008 14:47:54 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:47:58 HOURS Dialer Started
5/15/2008 14:48:00 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:48:04 HOURS Dialer Started
5/15/2008 14:48:05 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:48:09 HOURS Dialer Started
5/15/2008 14:48:10 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:48:15 HOURS Dialer Started
5/15/2008 14:48:16 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:48:20 HOURS Dialer Started
5/15/2008 14:48:21 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:48:25 HOURS Dialer Started
5/15/2008 14:48:26 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:48:31 HOURS Dialer Started
5/15/2008 14:48:32 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:48:36 HOURS Dialer Started
5/15/2008 14:48:37 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:48:42 HOURS Dialer Started
5/15/2008 14:48:43 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:48:47 HOURS Dialer Started
5/15/2008 14:48:48 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:48:52 HOURS Dialer Started
5/15/2008 14:48:53 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:48:58 HOURS Dialer Started
5/15/2008 14:48:59 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:49:03 HOURS Dialer Started
5/15/2008 14:49:04 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:49:08 HOURS Dialer Started
5/15/2008 14:49:09 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:49:14 HOURS Dialer Started
5/15/2008 14:49:15 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:49:19 HOURS Dialer Started
5/15/2008 14:49:20 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:49:24 HOURS Dialer Started
5/15/2008 14:49:26 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:49:31 HOURS Dialer Started
5/15/2008 14:49:32 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:49:36 HOURS Dialer Started
5/15/2008 14:49:38 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:49:42 HOURS Dialer Started
5/15/2008 14:49:43 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:49:47 HOURS Dialer Started
5/15/2008 14:49:48 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:49:52 HOURS Dialer Started
5/15/2008 14:49:54 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:49:58 HOURS Dialer Started
5/15/2008 14:49:59 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:50:03 HOURS Dialer Started
5/15/2008 14:50:05 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:50:09 HOURS Dialer Started
5/15/2008 14:50:10 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:50:14 HOURS Dialer Started
5/15/2008 14:50:15 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:50:20 HOURS Dialer Started
5/15/2008 14:50:21 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:50:25 HOURS Dialer Started
5/15/2008 14:50:26 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:50:30 HOURS Dialer Started
5/15/2008 14:50:31 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:50:36 HOURS Dialer Started
5/15/2008 14:50:37 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:50:41 HOURS Dialer Started
5/15/2008 14:50:42 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:50:46 HOURS Dialer Started
5/15/2008 14:50:47 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:50:52 HOURS Dialer Started
5/15/2008 14:50:53 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:50:57 HOURS Dialer Started
5/15/2008 14:50:58 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:51:02 HOURS Dialer Started
5/15/2008 14:51:04 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:51:08 HOURS Dialer Started
5/15/2008 14:51:09 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:51:13 HOURS Dialer Started
5/15/2008 14:51:14 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:51:19 HOURS Dialer Started
5/15/2008 14:51:20 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:51:24 HOURS Dialer Started
5/15/2008 14:51:25 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:51:29 HOURS Dialer Started
5/15/2008 14:51:30 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:51:35 HOURS Dialer Started
5/15/2008 14:51:36 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:51:40 HOURS Dialer Started
5/15/2008 14:51:41 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:51:45 HOURS Dialer Started
5/15/2008 14:51:47 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:51:51 HOURS Dialer Started
5/15/2008 14:51:52 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:51:56 HOURS Dialer Started
5/15/2008 14:51:57 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:52:02 HOURS Dialer Started
5/15/2008 14:52:03 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/15/2008 14:52:07 HOURS Dialer Started
5/15/2008 14:52:08 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:10:00 HOURS Dialer Started
5/19/2008 15:10:01 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:10:05 HOURS Dialer Started
5/19/2008 15:10:06 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:10:11 HOURS Dialer Started
5/19/2008 15:10:12 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:10:17 HOURS Dialer Started
5/19/2008 15:10:18 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:10:22 HOURS Dialer Started
5/19/2008 15:10:23 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:10:28 HOURS Dialer Started
5/19/2008 15:10:29 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:10:33 HOURS Dialer Started
5/19/2008 15:10:34 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:10:39 HOURS Dialer Started
5/19/2008 15:10:40 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:10:44 HOURS Dialer Started
5/19/2008 15:10:45 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:10:49 HOURS Dialer Started
5/19/2008 15:10:51 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:10:55 HOURS Dialer Started
5/19/2008 15:10:56 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:11:00 HOURS Dialer Started
5/19/2008 15:11:01 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:11:06 HOURS Dialer Started
5/19/2008 15:11:07 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:11:11 HOURS Dialer Started
5/19/2008 15:11:13 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:11:17 HOURS Dialer Started
5/19/2008 15:11:18 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:11:22 HOURS Dialer Started
5/19/2008 15:11:23 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:11:28 HOURS Dialer Started
5/19/2008 15:11:29 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:11:33 HOURS Dialer Started
5/19/2008 15:11:34 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:11:38 HOURS Dialer Started
5/19/2008 15:11:39 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:11:44 HOURS Dialer Started
5/19/2008 15:11:45 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:12:17 HOURS Dialer Started
5/19/2008 15:12:18 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:12:22 HOURS Dialer Started
5/19/2008 15:12:23 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:12:28 HOURS Dialer Started
5/19/2008 15:12:29 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:12:33 HOURS Dialer Started
5/19/2008 15:12:34 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:12:38 HOURS Dialer Started
5/19/2008 15:12:39 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:12:48 HOURS Dialer Started
5/19/2008 15:12:49 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:12:53 HOURS Dialer Started
5/19/2008 15:12:55 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:12:59 HOURS Dialer Started
5/19/2008 15:13:00 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:13:04 HOURS Dialer Started
5/19/2008 15:13:05 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:13:10 HOURS Dialer Started
5/19/2008 15:13:11 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:13:15 HOURS Dialer Started
5/19/2008 15:13:16 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:14:51 HOURS Dialer Started
5/19/2008 15:14:52 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:14:56 HOURS Dialer Started
5/19/2008 15:14:57 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:15:02 HOURS Dialer Started
5/19/2008 15:15:03 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:15:08 HOURS Dialer Started
5/19/2008 15:15:09 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:15:13 HOURS Dialer Started
5/19/2008 15:15:14 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:15:18 HOURS Dialer Started
5/19/2008 15:15:19 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:15:24 HOURS Dialer Started
5/19/2008 15:15:25 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/19/2008 15:15:29 HOURS Dialer Started
5/19/2008 15:15:30 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/20/2008 11:06:22 HOURS Dialer Started
5/20/2008 11:06:23 HOURS Program Halted. Database error: 3075 Syntax error (missing operator) in query expression 'np_date_time_requested <'. in Procedure: repeat_timer
5/20/2008 11:06:34 HOURS Dialer Started

[Tech Support]

Ah, that's completely different. That's not a carrier based error, that's a database error.

If you would, please email the pagegate.mdb database file (usually located in c:\pagegatedata\database\) to support at notepage dot com so I can have a look.

[mediapage]

The file pagegate.mdb does not exist on my hard drive. I have downloaded a new copy of the program and installed it. It STILL gives me the same error message and the .mdb file does not exist per my find search.

[Tech Support]

Ah, sorry... I should have paid attention, you're using NotePager Pro. The file is npp.mdb and it should be located in the NotePager Pro directory (typically c:\program files\notepager pro\)

[mediapage]

I am still waiting for a solution to this problem. I could just delete this program but I am "trying" to give it a fighting chance of being bought and used.

[OzCom]

Did you send the db to Tech Support for analysis?

_________________
Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate

[Tech Support]

I never actually received the database, did you send it over?

[mediapage]

Can you contact me directly so we can get this problem solved. This board is not sending me email when you reply.

I senmt the database to the support email address.

tom@mediapage.com

[OzCom]

After looking at your website - I think you would be far better off using PageGate in place of Notepager Pro - your throughput time would be drastically reduced and your options for message creation would be increased

_________________
Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate

[mediapage]

We only use a program to page to 4 pins in two systems and none of the test or phone paging; strictly snpp or wctp. Still feel that we should go to a larger program? I will try to get that file to you today...