| View previous topic :: View next topic |
| Author |
Message |
sabudeeb
Joined: 02 Sep 2007
Posts: 10
|
 Posted: Mon Nov 19, 2007 2:06 pm Post subject: I'm using Nokia 6210 as GSM Modem |
 |
|
Dears,,
I used Nokia 6210 as GSM Modem, what is the full configuration of this Cell phone to make to notepager work with this phone correctly
I used its manual and it says that it is supporting AT Commands and how can I know that this cell phone will work with notepager and it will send sms messages ?
what are the protocols that i should I use , GSMAT or another protocol??
thanks all
|
|
| Back to top |
|
Tech Support
Joined: 25 Aug 2003
Posts: 4387
|
| Posted: Mon Nov 19, 2007 4:11 pm Post subject: |
|
|
In order for NotePager Pro to be able to use a cel phone to deliver pages via the GSM protocol, the cel phone must be connected to the computer and configured as a 'modem' so Windows assigns the cel phone a COM port.
After the phone has been assigned a COM port by Windows, go into NotePager Pro and go to Tools - Settings - Modem. Set the Modem port to the COM port.
When configuring a GSM carrier, be sure to set the baud rate, data bits, stop bits, and parity to your phone's specifications. If you aren't sure of the phone's specifications, please see the manufacturer's User Guide and Documentation for your phone. |
|
| Back to top |
|
sabudeeb
Joined: 02 Sep 2007
Posts: 10
|
| Posted: Tue Nov 20, 2007 12:02 am Post subject: |
|
|
| ahaa..that's fine..now in the carrier confiugration..do I have to use the GSM-AT Protocol or not ? or there's no need to do that ?
|
|
| Back to top |
|
Tech Support
Joined: 25 Aug 2003
Posts: 4387
|
| Posted: Tue Nov 20, 2007 9:22 am Post subject: |
|
|
| Yes, you would need to use the GSM-AT protocol for the carrier. When configuring a recipient to use the GSM carrier you've configured, use the 10 digit cel phone number (no spaces or dashes) as the ID/PIN. |
|
| Back to top |
|
sabudeeb
Joined: 02 Sep 2007
Posts: 10
|
| Posted: Thu Nov 22, 2007 11:20 am Post subject: |
|
|
Do you think this GSM modem is perfect to be used to send SMS Messgaes
Siemens TC35 GSM Modem?
this is the link of the GSM Modem..please send me replying because we are gonna buy it next days
http://www.virtuosimo.com/siemens.html
|
|
| Back to top |
|
Tech Support
Joined: 25 Aug 2003
Posts: 4387
|
| Posted: Mon Nov 26, 2007 9:25 am Post subject: |
|
|
| Yes, that piece of hardware looks like it would be compatible. Bear in mind, there isn't a set list of hardware that does and does not work with our program. As long as it supports the GSM-AT protocol and is assigned a COM port by Windows, our program can probably use it. |
|
| Back to top |
|
|
