US Cellular accepts message but I never get it

[Jeff]

We are trying to set this up and when I send a test message it connects and tells me it was successful but I never get a message. Any suggestions
There messages are set to go to 10 digit # @email.uscc.net

[Tech Support]

If you send an email to that address with a regular email program, do you receive it?

[stueyneumann]

I am having the same problem, I am trying to send to US Celluar phone with the 10 digit # @email.uscc.net.

When I send it from the web page it works fine.

[Tech Support]

If you send a regular e-mail to 10digitnumber@email.uscc.net , do you receive it?

[stueyneumann]

yes when I send it as regular email to the phone it does get sent and recieved.

[Tech Support]

There a couple of things that you will need to do in order to send messages using NotePager Pro and SMTP.

1.) 'Add' a Carrier named "SMTP".
2.) Select SMTP as the protocol.
3.) Enter a Local Domain. This needs to look something like
"xyz.com" or "abc.net".
4.) Select "Deliver Directly to Destination Server"
5.) Make sure there is at least one DNS Server IP address listed.

This does not include "0.0.0.0", as this is not a valid IP address.

6.) Please ensure you have a 'Sender's Name' under 'Tools' - 'Settings' - 'General'. The "Sender's Name" cannot contain any spaces. It can contain upper/lowercase letters, numerals, periods, hyphens and underscores.
7.) When you 'Add' or 'Edit' a Recipient, select "SMTP" from the 'Carrier' drop down list.
8.) The 'ID/Pin' field name should change to 'E-Mail To:'
9.) Type in the e-mail address for the Recipient's Cell Phone.

A list of Carrier SMTP Domains can be found here: http://www.notepage.net/smtp.htm