USING NOTEPAGER PRO IN MALAYSIA

[JEFF]

[url]need help in setting up if it will work in MALAYSIA.

OUR CARRIER HERE IS MAXIS , CELCOM.

THANKS FOR YOUR HELP

[Tech Support]

I couldn't find much, but this may be worth a try:

You will need to install NotePager Pro on a computer that has Internet access. Then setup a new carrier in NotePager Pro and set it to use the SMTP protocol. Next, setup a new recipient and use this for the address:

<phone-number>@sms.maxis.net.my

where <phone-number> should be replaced with the telephone number for the mobile phone on the msxis network.

I hope this helps

[JEFF]

Thanks for your help.it is ok for use now but it seem slowly delivery to recipeint about delay 10 minutes ... is this others way to send the sms more faster ?

Thanks again

[Tech Support]

You will need to find out if maxis supports any of the following protocols: SNPP, WCTP, TAP, or UCP. If you find that they do, and can get setting information for that protocol, please post it here and we will help you get that working too.

[abah]

SMS center number (Malaysia - 60):
ADAM +60173600010
Celcom +60193900000
Digi +60162999000
Maxis +60120000015
TMTOUCH +60132400000

I not sure what protocol they use. Try Celcom with SNPP ?? I ever read about Celcom before.