sending a message to bell mobility in montreal canada

[Bobby]

hello!!

I have been trying to send messages to bell however the messages are not going through. The dialer log says that it was unable to connect to the carrier. I tried reducing the baud rate to 2400 and then 1200 but it still does not work.

help!!

thanks

[Bobby]

by the way I also tried setting the int string to auto but that didn't work either

[Bobby]

====================================
15/04/2004 4:59:51 AM Start connection to carrier
15/04/2004 4:59:51 AM Connect using TAP protocol
15/04/2004 4:59:51 AM Setting communication parameters
15/04/2004 4:59:52 AM Attempting to reset modem
15/04/2004 5:00:05 AM modem reset
15/04/2004 5:00:05 AM Attempting to send init string
15/04/2004 5:00:06 AM Init string sent
15/04/2004 5:00:06 AM Dialing carrier
15/04/2004 5:00:14 AM Waiting for connection
15/04/2004 5:00:26 AM Unable to connect to carrier
15/04/2004 5:00:26 AM Attempting to hang up modem
15/04/2004 5:00:33 AM modem hung up
15/04/2004 5:00:51 AM ====================================
15/04/2004 5:00:51 AM Start connection to carrier
15/04/2004 5:00:51 AM Connect using TAP protocol
15/04/2004 5:00:51 AM Setting communication parameters
15/04/2004 5:00:52 AM Attempting to reset modem
15/04/2004 5:01:05 AM modem reset
15/04/2004 5:01:05 AM Attempting to send init string
15/04/2004 5:01:06 AM Init string sent
15/04/2004 5:01:06 AM Dialing carrier
15/04/2004 5:01:14 AM Waiting for connection
15/04/2004 5:01:26 AM Unable to connect to carrier
15/04/2004 5:01:26 AM Attempting to hang up modem
15/04/2004 5:01:34 AM modem hung up
15/04/2004 5:01:34 AM Carrier retry limit reached. Marking pending messages as bad
15/04/2004 5:01:34 AM FAILED To:Mo bell Msg:Hi buddy!! just doing a test... Hope this doesn't wake you up.

that is the log.

i am using XP professional w/ a V.90 modem at 1200 baud calling bell mobility at 514-931-0441

although I put auto in the int string it automatically puts: AT&FQ0V1X4&D2N0+MS=V22,0

[Tech Support]

Some winmodems don't work will with paging carriers. Try downloading the latest modem drivers from the modem manufacturer's website.